+34 93 574 30 84
  • Facebook
  • Twitter
  • YouTube
  • Español
  • Français
  • English

Centrifugal pumps

The horizontal centrifugal pumps are suitable for all applications, with a wide range of flow rates and pressures and built in different materials.

  • Sanitary centrifugal pumps ECO-MAT and MATINOX ranges fully built in \\\"AISI 316L\\\" stainless steel with matt finish exterior, ideal for use in sanitary facilities.
  • Horizontal close-coupled biturbine centrifugal pumps HM-100 and HM-155 ranges with cast iron bodies ideal for pressure equipments, industrial and agricultural facilities.
  • Horizontal close-coupled single-impeller centrifugal pumps HM-95 ranges for medium flow rates, ideal for sprinkler irrigation, and industry pressure equipments.
  • Horizontal close-coupled centrifugal pumps DWO and CO ranges totally made in stainless steel ideal for industrial use, transfer of chemically aggressive liquids, recirculation of hot and cold water and industrial washing.
  • Horizontal close-coupled centrifugal pumps MO, BMO and RGT-40 ranges very robust with standardized pump body according to DIN 24255, suitable for air conditioning systems, fire-fighting equipment and water supply industry in general.
  • On-bench centrifugal pumps very robust SB range with standardized pump body according to DIN 24255, suitable for air conditioning systems, fire fighting equipment, industry and water supplies in general.
  • Centrifugal pumps MX ranges completely made in 'AISI 316L' stainless steel and electro-polished finish, with the possibility of mounting in close-coupled with standard motor or on bench with coupling.
  • On-bench centrifugal pumps HSQ and HFT ranges built according to DIN 24256 with pump body and impeller made of materials under demanad, ideal for chemical process applications and high temperature.

ECO-MAT

Centrifugal sanitary electro-pumps in AISI 316L

APPLICATIONS
  • Horizontal close-coupled centrifugal electropump completely in ‘AISI 316L’ stainless steel with matt finish exterior, ideal for using in sanitary facilities.
TECHNICAL CHARACTERISTICS
  • Type: Sanitary
  • IP: 54
  • Isolation: F
  • r.p.m.: 2900
  • Cooling: External ventilation
  • Temp. max. (ºC): 100
  • Max. Viscosity: 350 cPs
  • Impeller: Semi-open
MATERIALS
  • Pump body: ‘AISI 316 L’ Stainless steel
  • Impeller: ‘AISI 316 L’ Stainless steel
  • Shaft: ‘AISI 316 L’ Stainless steel
  • Mechanical seal: According to circulating liquid
  • Plugs: ‘AISI 316 L’ Stainless steel
  • O’rings: According to circulating liquid
  • Max. suction depth: 6 m.

MATINOX

Sanitary centrifugal electro-pumps in AISI 316L

APPLICATIONS
  • Horizontal close-coupled centrifugal electropumps made completely in ‘AISI 316L’ stainless steel with exterior matt finish, suitable for sanitary facilities.
TECHNICAL CHARACTERISTICS
  • Type: Sanitary
  • IP: 54
  • Isolation: F
  • r.p.m.: 2900
  • Cooling: External ventilation
  • Temp. max. (ºC): 110
  • Max. Viscosity: 350 cPs
  • Max. suction depth: 6 m.
  • Impeller: Semi-open
MATERIALS
  • Pump body: ‘AISI 316 L’ Stainless steel
  • Impeller: ‘AISI 316 L’ Stainless steel
  • Shaft: ‘AISI 316 L’ Stainless steel
  • Mechanical seal: According to circulating liquid
  • Plugs: ‘AISI 316 L’ Stainless steel
  • O’rings: According to circulating liquid

HM100

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS
  • Twin-impeller electro-pumps suitable for pressure equipments, industrial and agricultural installations.
TECHNICAL CHARACTERISTICS
  • Type: Twin impeller
  • Flow (l/h): 37000 - 700
  • Height (m): 20 - 98
  • r.p.m.: 2850
  • IP: 44
  • Isolation: F
  • Cooling: External ventilation
  • Temp. max. (ºC): 80
  • Impeller: Closed
MATERIALS
  • Pump body: G20 Cast iron
  • Suction body: G20 Cast iron
  • Impellers: Brass
  • Intermediate disc: G20 Cast iron
  • Shaft: AISI 303/304 Stainless steel
  • Mechanical seal: Ceramic/Graphite

HM155

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS
  • Twin impeller electro-pumps suitable for pressure equipments and household sprinkler installations.
TECHNICAL CHARACTERISTICS
  • Type: Twin impeller
  • Flow (l/h): 12600 - 300
  • Height (m): 20 - 50
  • r.p.m.: 2850
  • IP: 44
  • Isolation: F
  • Cooling: External ventilation
  • Temp. max. (ºC): 45
  • Impeller: Closed
MATERIALS
  • Pump body: G20 Cast iron
  • Union body: G20 Cast iron
  • Impellers: Noryl®
  • Diffusers: Noryl®
  • Shaft: AISI 303/304 Stainless steel
  • Mechanical seal: Ceramic/Graphite

HM95

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS
  • Medium-flow single impeller electro-pumps suitable for sprinkler irrigation, pressure equipments and industry.
TECHNICAL CHARACTERISTICS
  • Type: Single impeller
  • Flow (l/h): 20000 - 900
  • Height: 17 - 53
  • r.p.m.: 2850
  • IP: 44
  • Isolation: F
  • Cooling: External ventilation
  • Temp. max.(ºC): 80
  • Impeller: Closed
  • Max. suction depth: 7 m.
MATERIALS
  • Pump body: G20 - G20 Cast iron
  • Union body: G20 Cast iron
  • Impellers: Bronze
  • Shaft: ‘AISI 416’ Stainless steel
  • Mechanical seal: Ceramic/Graphite
  • O’ring: Nitrile rubber

RGM10

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS
  • Robust electro-pumps of high flow and low pressure suitable for drip irrigation and open channels.
TECHNICAL CHARACTERISTICS
  • Type: High flow
  • Flow (l/h): 56000 - 1500
  • Height (m): 3 - 28
  • r.p.m.: 2850
  • IP: 44
  • Isolation: F
  • Cooling: External ventilation
  • Temp. max. (ºC): 80
MATERIALS
  • Pump body: G20 Cast iron
  • Union body: G20 Cast iron
  • Impeller: Bronze (RGM/T-8-10), Brass (RGM/T-15-20), Cast iron G20 (RGM/T-17/2-20/2)
  • Shaft: AISI 304 Stainless steel (RGM/T-8-10), AISI 416 Stainless steel (RGM/T-15-20), AISI 303 Stainless steel (RGM/T-17/2-20/2)
  • Mechanical seal: Ceramic/Graphite

DWO

Stainless steel AISI 304 centrigufal electro-pumps

APPLICATIONS
  • Horizontal close-coupled centrifugal electro-pumps made completely in stainless steel, suitable for industrial use, chemically non-aggressive liquid transfer and hot and cold water recirculation.
TECHNICAL CHARACTERISTICS
  • Type: Stainless steel
  • Flow (l/h): 64000 - 1000
  • Height (m): 5 - 18
  • r.p.m.: 2900
  • IP: 55
  • Isolation: F
  • Cooling: External ventilation
  • Temp. max. (ºC): -15 / 80
  • Impeller: Opened
  • Ø Solids: 14 mm
MATERIALS
  • Pump body: ‘AISI 304’ Stainless steel
  • Motor casing: Aluminum
  • Internal disc: ‘AISI 304’ Stainless steel
  • Impellers: ‘AISI 304’ Stainless steel
  • Shaft: ‘AISI 303’ Stainless steel
  • Mechanical seal: Silicon/Graphite/EPDM

CO

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS
  • Centrifugal electro-pumps completely in AISI 316L stainless steel, suitable for numerous applications in the food and textile industry and industrial washings.
TECHNICAL CHARACTERISTICS
  • Type: Stainless steel
  • Flow (l/h): 52000 - 1000
  • Height (m): 4 - 24
  • r.p.m.: 2900
  • IP: 55
  • Isolation: F
  • Cooling: External ventilation
  • Temp. max. (ºC): -10 / 120
  • Impeller: Opened
  • Ø Solids: CO350: 11 mm, CO500: 20 m
MATERIALS
  • Pump body: ‘AISI 316’ Stainless steel
  • Impellers: ‘AISI 316’ Stainless steel
  • Internal disc: ‘AISI 316’ Stainless steel
  • Shaft: ‘AISI 316’ Stainless steel
  • Mechanical seal: Ceramic/Carbon/FPM
  • O’ring: FPM

MO

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS
  • Standardized electro-pumps suitable for large pressure equipments, irrigation in general, airconditioning systems (heating and cooling), fire fighting equipments, industry and water supply in general.
TECHNICAL CHARACTERISTICS
  • Type: Standardized
  • Stardard: EN 733 (DIN 24255)
  • Flow (l/h): 240 - 0
  • Height (m): 9,4 - 93
  • r.p.m.: 2900
  • IP: 44/55
  • Isolation: F
  • Cooling: External ventilation
  • Temp. max. (ºC): 80
  • Temp. Amb. max. (ºC): 40
MATERIALS
  • Pump body: G20 Cast iron
  • Union body: G20 Cast iron
  • Impeller: Bronze / G20 Cast iron
  • Shaft: AISI 304 / 316 Stainless steel
  • Mechanical seal: Ceramic/Graphite

BMO

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS
  • Standardized electro-pumps suitable for large pressure units, irrigation in general, air-conditioning systems (heating and cooling), fire protection, industry and water supply in general
MATERIALS
  • Stainless steel shaft
  • Pump body and impeller in G25 iron casting
  • Mechanical seal of ceramics-graphite
TECHNICAL CHARACTERISTICS
  • Single-impeller close-coupled electro-pump with standardized pump body according to standards DIN 24255 and UNI 7467
  • Enclosed asynchronous motor with external ventilation, suitable for continuous service
  • IP-55 Protection
  • F class insulation
  • Voltage 230/400 V. up to 5.5 CV and 400/690 V. from 7.5 CV
  • Water temperature from -30 ºC to 105 ºC
  • Counterflanges, joints and screws are NOT provided with this model
Note: All these models can be completely manufactured in MARINE BRONZE or AISI 316 STAINLESS STEEL

SB

Centrifugal electro-pumps execution on frame

APPLICATIONS
  • Centrifugal electro-pumps on base plate execution are specially designed for domestic water supply, industry use, irrigation, condensed water, hot water, cooling water and water treatment in general.
TECHNICAL CHARACTERISTICS
  • Type: Bareshaft - On base plate
  • Stardard: EN 733 (DIN 24255)
  • Flow (m3/h): 0 - 600
  • Height (m.): 0 - 100
  • IP: 55
  • Isolation: F
  • Cooling: External ventilation
  • Temp. max. (ºC): 100
  • Temp. Amb. max. (ºC): 40
MATERIALS
  • Pump body: GG25 Cast iron
  • Suction body: GG25 Cast iron
  • Impeller: GG25 Cast iron, (Opc.) Bronze
  • Shaft: AISI 420 Stainless steel, (Opc.) AISI 316 Stainless steel
  • Mechanical seal: Graphite/Ceramic, (Opc.) Other materials

RGT40

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS
  • Standardized electro-pumps suitable for drip irrigation and open channels, heating and cooling systems or for any installation where big flows are needed at low pressures.
TECHNICAL CHARACTERISTICS
  • Type: Standardized
  • Stardard: EN 733 (DIN 24255)
  • Flow (m3/h): 12 - 85
  • Height (m): 10 - 21
  • r.p.m.: 2850
  • IP: 55
  • Isolation: F
  • Cooling: External ventilation
  • Temp. max. (ºC): 90
MATERIALS
  • Pump body: Cast iron
  • Union body: Cast iron
  • Impeller: Cast iron
  • Shaft: Carbon steel
  • Mechanical seal: Ceramic/Graphite/NBR/AISI 304
  • Juntas: NBR

MX

Horizontal close-coupled electro-pump in stainless steel


APPLICATIONS
  • Centrifugal normalized electro-pumps built totally in stainless steel, specially suitable for agricultural and industrial supplies, pressure washing, water treatments, heating, cooling towers and heat exchangers.
TECHNICAL CHARACTERISTICS
  • Type: Stainless Steel
  • Stardard: EN 733 (DIN 24255)
  • Flow (m3/h): 240 - 0
  • Height (m): 0 - 95
  • r.p.m.: 1450-2900
  • IP: 55
  • Isolation: F
  • Cooling: External ventilation
  • Temp. (ºC): -10ºC / 90ºC (-10ºC / 110ºC)
  • Impeller: Semi-open
  • Viscosity max.: 350 cPs
MATERIALS
  • Pump body: AISI 304 / 316 Stainless steel (L Vesion)
  • Union body: AISI 304 / 316 Stainless steel (L Vesion)
  • Impeller: AISI 304 / 316 Stainless steel (L Vesion)
  • Shaft: AISI 304 / 316 Stainless steel (L Vesion)
  • Mechanical seal: Carbon/Ceramic/NBR (SiC/SiC/FPM “Viton”)

HSQ

Centrifugal electro-pumps for chemical processes

APPLICATIONS
  • Single-stage centrifugal bare-shaft pumps (for assembling over base plate) with enclosed impeller, specially designed for working with chemical products.
  • These pumps can be manufactured in different metals according to the characteristics of the liquid to be used with.
TECHNICAL CHARACTERISTICS
  • Type: Bare-shaft - Chemical process
  • Stardard: EN 733 (DIN 24256)
  • Conformity: ATEX 94/9/CE
  • Flow (m3/h) Max.: 450
  • Height (m) Max.: 130
  • r.p.m.: 1450-2900
  • IP: 55
  • Isolation: F
  • Cooling: External ventilation
  • Temp. (ºC): -40ºC / 250ºC
  • Impeller: Closed
MATERIALS
  • Pump body: According to the circulating liquid
  • Impeller: According to the circulating liquid
  • Shaft: AISI 316 L Stainless steel
  • Mechanical seal: According to the circulating liquid
  • O’rings: According to the circulating liquid

HFT

Centrifugal electro-pumps for chemical processes

APPLICATIONS
  • Single-stage bare-shaft centrifugal pumps (for assembling over base plate) specially designed for high temperature and medium-pressure thermal fluids transfer, no need of any external cooling.
  • These pumps can be manufactured in different metals according to the specifications of the liquid to be used with.
TECHNICAL CHARACTERISTICS
  • Type:Bare-shaft - Termal fluid
  • Stardard: EN 733 (DIN 24256)
  • Conformity: ATEX 94/9/CE
  • Flow (m3/h): 2 - 200
  • Altura (m): 4 - 98
  • r.p.m.: 1450 - 2900
  • IP: 55
  • Isolation: F
  • Cooling: External ventilation
  • Temp. Max. (ºC): 350ºC
MATERIALS
  • Pump body: GG-40 Nodular cast iron
  • Impeller: GG-20 Cast iron
  • Shaft: AISI 316 Stainless steel
  • Mechanical seal: Silicon/Graphite/Viton
  • O’rings: Viton


Valid HTML5 ¡CSS Válido!