CUADROS-RESIDUAL

Electrical panels for wastewater

LOGICPANEL SEWAGEAPPLICATIONS

Control panel for waster water lifting station with 1 or 2 pumps using electronic level probe instead of conventional level switches.
The control panel includes the level probe that is suitable for working with wastewater and allows installation of a conventional level switch as an emergency system.
Also includes a configurable remote contact.
Easy and accurate configuration thanks to the control panel that allows to adjust the start, stop and alarm levels as well as the power consumption of the pumps.
Its display allows for real-time visualization of the water level and power consumption of the pumps.
Pumps alternate at each start or forced alternation by time in case of continuous operation.
It also includes anti-lock protection: if the pumps remain inactive for 24 consecutive hours, the device will start the pump for 5 seconds to prevent its blocking by inactivity.

TECHNICAL CHARACTERISTICS

Supply Voltage: M2HP (c.2753): 1 ~ 115 / 230 Vac ±10% - T4HP (c.2754): 3 ~ 400 Vac ±10%
Frequency: M2HP (c.2753): 50 / 60 Hz - T4HP (c.2754): 50 / 60 Hz
Max. intensity of pumps: M2HP (c.2753): 10 A - T4HP (c.2754): 8 A
Protection degree: M2HP (c.2753): IP-65 - T4HP (c.2754): IP-65
Max. temperature: M2HP (c.2753): 60ºC - T4HP (c.2754): 60ºC
Dimensions: M2HP (c.2753): 205 x 170 x 53 mm - T4HP (c.2754): 250 x 350 x 150 mm
Output level probe: M2HP (c.2753): 4-20 mA - T4HP (c.2754: 4-20 mA
Level probe cable length: M2HP (c.2753): 5 m. - T4HP (c.2754): 5 m.
Min. reading height: M2HP (c.2753): 5 cm - T4HP (c.2754): 5 cm
Max. reading height: M2HP (c.2753): 5 m - T4HP (c.2754): 5 m
Weitght: M2HP (c.2753):0,5 kg - T4HP (c.2754): 2,8 kg
Certifications: M2HP (c.2753): CE - TUV - T4HP (c.2754): CE - TUV

ELECTRIC CONTROL PANELS FOR WASTE WATERTECHNICAL CHARACTERISTICS

Supply voltage: single-phase 1~230V - three-phase 3~400V - three-phase 3~230V (230V control circuit).
Direct Starter (DS) up to 5,5CV (4kW) and Star-Delta (SD) from 7,5CV (5,5kW).
Plastic box up to 5,5CV (4kW) and metallic box from 7,5CV (5,5kW).
Pump/s protection by circuit breaker.
3 positions selector switch MAN-O-AUT (manual - OFF - automatic) for every pump.
Pump-on and themal switch pilots.
Pilot and acoustic alarm for overlevel.
Pumps alternation sequence by means of a relay.
Operation by level switches (single panel: 1 or 3 level switches / double panel: 4 level switches).
On request it can be supplied with ATEX-EX intrinsic secutity barriers.