Pumps for diesel
Pumps for diesel are surface pumps built entirely in suitable materials for pumping oil, ideals for diesel transfer applications or boilers supply, generators, etc.
- Small, simple and portable pumps for diesel BE and NOVAX ranges ideal for transferring diesel, wine, grape-juice, fresh water, salt water and oils whose viscosity does not exceed 30 cst.
- Self-priming diesel pumps with liquid ring HGM ranges specially designed for pumping diesel to supply heating boilers.
- Self-priming diesel vane pumps BAG range ideal for the transfer of diesel oil or other similar low viscosity liquids with fitting for direct connection in oil tank.
-
Diesel transfer equipment BAG-50 COM ranges are a complete equipment ideal for filling vehicles thanks to its suction-impulsion hoses, automatic pistol and flow meter. It does NOT include storage bin.
-
Accessories DIESEL KIT ranges are the ideal accessories for an optimal operation of diesel transfer pumps.
- Self-priming liquid ring diesel pumps with adapter for use by drilling DRILL range ideal for transferring diesel, wine, grape-juice, fresh water, salt water and oil viscosity not exceeding 30 cst.
- Volumetric diesel gear pumps W and F ranges very robust ideal for transferring diesel, oils, syrups and in general all kinds of lubricating fluids without suspended particles.
NOVAX
Self-suction pumps for racking
APPLICATIONS
- Self-priming electropumps built in stainless steel alloy.
- Ideal for transferring fluid foods without suspended foreign bodies, whose viscosity does not exceed 30 cst.
- Type: Self-primming
- Flow (l/h): 100 - 6500
- Head (m): 0 - 24
- IP: X4
- Cooling: External ventilation
- Temp. max.: 35ºC
- Room temp.: 4ºC - 40ºC
- Max. suction depth: 9 m.
- Viscosity max.: 30 cst
- With rotational direction inverter switch.
- Built-in oil seal.
- Vertical fittings in NOVAX 20/25 models.
- Vertical and curved fittings in NOVAX 30/40 models.
- Single-phase models with built-in heat protector.
- For temperatures up to 95ºC, please consult models.
- Pump body: Stainless steel
- Seal bracket cover: Noryl®
- Impeller: Stainless steel
- Fittings: Stainless steel
- Shaft: Stainless steel
- O'rings: NBR
BE
Self-suction pumps for racking
APPLICATIONS
- Self-priming liquid-ring electro-pumps.
- Suitable for the transfer of gas-oil, wine, grape juice, fresh and sea water and oils with viscosity lower than 30 cst.
- Type: Self-primming
- Flow (l/h): 100 - 6500
- Head (m): 0 - 24
- IP: X4 / 55
- Cooling: External ventilation
- Temp. max.: 35ºC
- Ambient temp.: 4ºC - 40ºC
- Max. suction depth: 9 m.
- Viscosity max.: 30 cst
- Reversible close-coupled pumps with commutator of rotation direction change (except for model MARINA).
- Built-in oil seal.
- Vertical fittings in models BE-20M, BE-25M and MARINA.
- Vertical and curved fittings in models BE-30/40.
- Single-phase models with built-in heat protector.
- Pump body: Brass
- Seal support cover: Noryl®
- Impeller: Brass
- Fittings: Brass
- Shaft: ‘AISI 304’ Stainless steel
- O'rings: NBR
HGM
Self-suction electro-pumps for Gas-oil
APPLICATIONS
- Self-priming liquid-ring electro-pumps.
- Suitable for pumping and supply of gas-oil to heating boilers through a pressure equipment.
- Type: Self-priming for gas-oil
- Flow (l/h): 300 - 2700
- Head (m): 5 - 50
- rpm: 2850
- IP: 44 (HGM-45) - 55 (HG-60/80)
- Isolation: F
- Cooling: External ventilation
- Temp. max. (ºC): 60 (HGM-45) - 90 (HG-60/80)
- Max. suction depth: 7 m.
- In case of suctions higher than 4 m., the tube diameter must be increased.
- Pump body: Cast iron
- Union body: Cast iron
- Impeller: HGM-50: Bronze, HGM/T-60 HGM/T-80: Brass
- Shaft: HGM-45: ‘AISI 304’ Stainless steel. - HGM/T-60 HGM/T-80: ‘AISI 416’ Stainless steel.
- Mechanical seal: Resistant to hydrocarbon
BAG
Electro-pump for gas-oil
APPLICATIONS
- Self-priming vane electro-pump.
- Suitable for gas-oil or similar low viscosity liquids transfer.
- Type: Self-priming for gas-oil
- Flow (l/h): 1000 - 4000
- Head (m): 0 - 20
- rpm: 2800
- IP: 55
- Isolation: F
- Cooling: External ventilation
- Max. viscosity: 43 cst
- Pumps are supplied with 2 m. cable with plug and on-off switch.
- 2’’ thread fitting allows direct connection to gas-oil tanks.
- Pump body: Cast iron
- Pump body cover: Stainless steel
- Impeller: Stainless steel
- Impeller vanes: POM plastic
- Shaft: Stainless steel
- Seal: Viton
- O'rings: Viton
BAG50COM
Transfer equipment for gas-oil
APPLICATIONS
- Diesel oil transfer equipments.
- Suitable for the supply of vehicles, tanker trucks, drums and any kind of diesel oil container.
- The pump has a 2” fitting that allows a direct connection to the diesel oil tanks.
- Type: Transfer equipment for gas-oil
- Flow (l/h): 1000 - 4000
- Head (m): 0 - 20
- rpm: 2800
- IP: 55
- Isolation: F
- Cooling: External ventilation
- Max. viscosity: 43 cst
- 1” Foot valve
- 1,5 m. Suction hose for gas-oil
- Self-primming pump BAG-50 with fitting for direct connection to tank
- Pump-flowmeter union fitting
- Elbow 90º 1”
- 5 m. Discharge Ø20mm hose for gas-oil
- 1’’ Rotation automatic gas-oil gun (60 l/min flow)
- 1” Foot valve
- 1,5 m. Suction hose for gas-oil
- Self-primming pump BAG-50 with fitting for direct connection to tank
- Pump-flowmeter union fitting
- Mechanical flowmeter in aluminium
- Elbow 90º 1”
- 5 m. Discharge Ø20mm hose for gas-oil
- 1’’ Rotation automatic gas-oil gun (60 l/min flow)
DIESELKIT
Accessories for gas-oil transfer
DIESEL KIT 20/25 MM.
- Complete transfer kit:
- Gun in plastic
- 2 stainless steel flanges
- Suction filter
- 5m. hose resistant to gas-oil
- Mechanical flowmeter without filter. 3-digit partial counter and 9-digit totalization counter.
- Type: Gas-oil flowmeter
- Flow (l/h): 1200 - 7200
- Max. pressure: 3,5 BAR
- Precision: ± 2%
- Cooling: External ventilation
- Storage temp.: -10ºC - 60ºC
- Head loss: 0,05 - 0,4 BAR
- Flowmeter body: Aluminium
- Type: Distribution gun
- Flow: 80 l/min
- Hose fitting: Ø 20mm
- Stop system: Manuel
- Type: Distribution gun with rotary fitting
- Flow: 60 l/min
- Max. pressure: 2,5 BAR
- Hose fitting: Ø 20mm
- Stop system: Automatic (when the tank is full)
DRILL
Accessories for gas-oil transfer
APPLICATIONS
- Reversible self-priming liquid ring electro-pumps.
- Suitable for the transfer of fresh and sea water, gas-oil, wine, grape juice and oils.
- With adapter for use by drill.
- Type: Pump for drill
- Flow (l/h): 0 - 1500
- Head (m): 0 - 24
- Ø Shaft: 9 mm
- r.p.m.: 3000
- Temp. max.: 35ºC
- Max. suction depth: 5 m.
- Viscosity: 30 cst
- Pump body: Brass
- Impeller: Brass
- Fittings: Brass
- Shaft: ‘AISI 304’ Stainless steel
- Seal support cover: Noryl®.
W
One-piece gear electro-pump
APPLICATIONS
- Robust electro-pumps suitable for the transfer of gas-oil, fuel-oil, oils and in general, all kind of lubricant liquids with no suspended particles.
- Type: Self-priming with gears
- Flow (l/h): 220 - 5000
- Pressure (BAR): 6 - 10
- IP: 54
- Isolation: F
- Cooling: External ventilation
- Temp. max. (ºC): 90
- Max. suction depth: 5 m.
- Viscosity max.: 10.000 cps
- Seal: Packing gasket
- It can be installed in any position, vertical or horizontal, in order to better fit to the available space.
- Built-in safety valve in all models.
- Upon request pressure equipments for gas-oil can be manufactured with these models.
- Pump body: GG-20 Cast iron
- Gears: Treated steel
F
One-piece gear electro-pump
APPLICATIONS
- Robust self-priming close-coupled gear pumps, volumetric and positive displacement type.
- Useful for the transfer of viscous fluids, particularly: gas-oil, fuel-oil, oils, syrups, glycerine, paint, etc. and in general, all kind of lubricant liquids without suspended particles.
- Type: Self-priming with gears
- Motor: Three-phase
- Isolation: F
- r.p.m.: 1450
- Cooling: External ventilation
- Max. pressure: 12 BAR
- Temp. max.: 180ºC
- Max. viscosity: 350 cSt (SAE 120)
- It can be installed in any position, vertical or horizontal, in order to better fit to the available space.
- Built-in safety valve in the pump cover.
- Upon request, available with 6 or 8-poles motors or even with geared motor for higher viscosity.
- Also available with ATEX motor.
- Possibility of installation with packing to work with liquids up to 250 ºC
- Pump body: Cast iron.
- Gears: Case-hardering steel.
- Shaft: Case-hardering steel.
- Mechanical seal: Viton
- O'ring: Viton
