Pumps for various uses
-
Filling equipment for solar circuits SOLAR ranges are equipments designed to automate the filling, in case of small leaks, in solar energy circuits.
- Peripheral clean water pumps FUCSIA ranges ideal for small industrial pressure equipments or agricultural applications.
- Semi-submersible cooling drum pumps for machine tools ZV range specially designed for recirculating coolant up to 60º.
- Magnetic drive pumps devoid of mechanical seal MAG range, built in polypropylene (PP) or polyvinylidene fluoride (PVDF) very suitable for the pumping of acids, corrosive liquids, alkalis, seawater, solvents, bleach, laboratory facilities, etc.
SOLAR
Solar cirucit filling equipments
APPLICATIONS
- Compact and fixed equipment specially designed for the filling of circuit in solar-energy installations.
- It can maintain the installation at constant working pressure, filling collectors when there is leakage or decrease in the initially set pressure.
- Pressure booster NIZABOX 43/LOGICPRESS of 0,5HP II 230V
- Tank in high density polyethylene of 120 L. capacity
- Foot valve and 1’’ shut-off ball valve
- Accessories of suction installation in PVC
FUCSIA
Peripheral centrifugal electro-pumps
APPLICATIONS
- Peripheral electro-pumps suitable for installations where high pressure and reduced flows are required.
- Type: Peripheral
- Flow (l/h): 3000 - 300
- Head (m): 10 - 50
- r.p.m.: 2800
- IP: X5
- Isolation: F
- Cooling: External ventilation
- Temp. max. (ºC): 60
- Max. suction depth: 7 m.
- Pump body: Brass
- Impeller: Brass
- Shaft: ‘AISI 420’ (50) ‘AISI 416’ (100) Stainless steel
- Mechanical seal: Ceramic/Coal
- Screws: Stainless steel
ZV
Cooling electro-pumps for machine tools
APPLICATIONS
- Centrifugal semi-submersible electro-pumps specially designed for the recirculation of coolant liquids up to 60º C
- Type: Semi-submersible stem pump
- Supply voltage: Three-phase 3~230/400V 50Hz
- IP: X5
- Isolation: F
- r.p.m.: 2800
- Cooling: Closed motor without ventilation (ZV 35) - External ventilation (ZV-90/100)
- Temp. max. (ºC): 60
- Stem: Nylon (ZV 35) / PBT (ZV 90-100)
- Pump body: Polypropylene (ZV 35) / PBT (ZV 90-100)
- Impeller: Nylon (ZV 35) / Ryton (ZV 90-100)
- Shaft: ‘AISI 420’ Stainless steel
- Screws: Stainless steel
MAG
Magnetic dragging pumps
APPLICATIONS
- Magnetic close-coupled pumps with no mechanical seal, suitable for aggressive and clean liquids
- Pumps for pumping acids, corrosive liquids, alkali, sea-water, solvents, bleach factories, photographic processing solutions, aquariums, laboratory installations, etc.
- Type: Magnetic drive
- Flow (m3/h): 0,3 - 40
- Head (m): 2 - 28
- IP: 44 (MAG-13/17) - 55 (MAG-33/400)
- Isolation: F
- r.p.m.: 2850
- Cooling: External ventilation
- Room temp. (ºC): 40
- Prevent from suction of foreign bodies.
- No operation with hoses with Ø lower than inlets.
- Do not work in dry conditions.
- They must be used always loaded or with priming tank (supplied separately).
- Pump body: Polypropilene (standard) PVDF (optional MAG-33...400)
- Impeller: Polypropilene (standard) PVDF (optional MAG-33...400)
- Shaft: Ceramic
- O'rings: Viton
