Submersible pumps for sewage
Submersible pumps for sewage have turbines with large distance for the passage of suspended solids and are ideal for pumping dirty water, waste water, sewage, industrial, agricultural, septic tanks, treatment plants, etc.
- Submersible pumps for sewage INOX-PALM and IPX ranges with vortex impeller with large distance for the passage of solid ideal to evacuate waste water with suspended solids.
- Submersible pumps for sewage MINIPAF, PAF and PAF-20 ranges built in cast iron ideal for pumping waste water, sewage, septic tanks and sewage treatment plants.
- Submersible pumps for sewage AT and LFC ranges, with robust construction that allows its use in different hydraulic fluids depending on their design.
- Submersible pumps for sewage TRITURANT130 and TRITURANT ranges with a grinding system ideal for domestic, industrial, sanitary or agricultural waste water.
- Submersible pumps for sewage SUPERSAND ranges specially designed for drainage and bailing of muddy water, open wells, dewatering of formwork or trenching and canals.
- Submersible pumps for sewage SRI ranges totally made of AISI 316 stainless steel suitable for pumping acid water, sea water, waste water from chemical processes and all types of liquids with suspended particles.
INOXPALM
Submersible electro-pump for residual water
APPLICATIONS
- Submersible electro-pumps.
- Suitable for drainage of waste water, rain water, industrial water with suspended solid particles.
- Vortex-type impeller with large distance for foreign bodies pitch.
- Type: Submersible
- Flow (l/h): 1000 - 72000
- Head (m): 0 - 19
- rpm: 2850
- IP: 68
- Isolation: F
- Cooling: Dielectric oil
- Temp. max.(ºC): 40
- Max. immersion depth: 15 m.
- Impeller: Vortex
- Built-in thermo-amperimetric protection in single-phase models.
- Models Inox-Palm 1 and 2 are provided with 5 meters of cable and models Inox-Palm 2.5, 3, 4 and 5 with 10 meters of cable.
- All single-phase models are provided with level switch.
- Vertical level switch upon request
- Pump body: G20 Cast iron
- Base: G20 Cast iron
- Pump housing: ‘AISI 304’ Stainless steel
- Motor cover: ‘AISI 304’ Stainless steel
- Handle: ‘AISI 304’ Stainless steel
- Impeller: INOX-PALM 1/2/2.5/3/4: ‘AISI 304’ Stainless steel, INOX-PALM 5: G20 Cast iron
- Shaft: ‘AISI 420’ Stainless steel
- Mechanical seal: INOX-PALM 1/2/2.5/3/4: Graphite/Alumina, INOX-PALM 5: Graphite/Alumina + Silicon-Carbide/Alumina
- O'rings: NBR
IPX
Submersible electro-pump for sump and loaded water
APPLICATIONS
- Submersible electro-pumps.
- Submersible electro-pumps suitable for the drainage of waste water, rain water, industrial water with suspended solid particles.
- Thanks to its vortex-type impeller with large distance pitch for particles
- Type: Submersible
- Flow (l/h): 1000 - 48000
- Head (m): 0 - 21
- rpm: 2850
- IP: 68
- Isolation: F
- Cooling: Dielectric oil
- Temp. max.(ºC): 40
- Max. inmersion depth: 15 m.
- Impeller: Vortex
- Built-in thermo-amperimetric protection in all models.
- Single-phase models are provided with level switch.
- Models IPX 1A and 2A are provided with 5 meters of cable.
- Models IPX 3 and 4 are provided with 10 meter of cable.
- Vertical level switch upon request.
- Pump body: ‘AISI 304’ Stainless steel
- Base: ‘AISI 304’ Stainless steel
- Pump housing: ‘AISI 304’ Stainless steel
- Motor cover: ‘AISI 304’ Stainless steel
- Handle: ‘AISI 304’ Stainless steel
- Impeller: ‘AISI 304’ Stainless steel
- Shaft: ‘AISI 316’ Stainless steel
- Mechanical seal: Graphite/Alumina
- O'rings: NBR
MINIPAF
Submersible electro-pump for residual water
APPLICATIONS
- Submersible electro-pump suitable for bailing waste water, sewage, septic tanks and water purification plants.
- Pumps with open impeller allow liquid flow with suspended solid particles.
- Pumps with vortex impeller with total pitch, allow the flow of large solid particles almost of the same diameter as outlet.
- Type: Submersible
- Flow (m3/h): 30 - 0,6
- Head (m): 1 - 11
- rpm: 2850
- IP: 68
- Isolation: F
- Cooling: Oil and pumped water
- Temp. max.(ºC): 40
- Max. Immersion depth: 20 m.
- pH: 6 - 11
- Max. density: 1100 Kg/m3
- Provided with 10 meters of cable, except 0,5 HP models (5 meters)
- Single-phase models are provided with level switch.
- Pump body: G20 Cast iron
- Motor cover: G20 Cast iron
- Impeller: G20 Cast iron
- Shaft: ‘AISI 420’ Stainless steel
- Mechanical seal: Alumina/Silicon-Carbide
- Screws: ‘AISI 304’ Stainless steel
- Handle: Stainless steel
- O’rings: NBR
PAF
Submersible electro-pump for residual water
APPLICATIONS
- Submersible electro-pump suitable for pumping, waste water, septic tanks and water treatment plants.
- Type: Submersible
- Flow (m3/h): 54 - 1,5
- Head (m): 1 - 19
- rpm: 2850
- IP: 68
- Isolation: F
- Cooling: Oil and pumped water
- Temp. max.(ºC): 40
- Max. Immersion depth: 20 m.
- pH: 6 - 11
- Max. density: 1100 Kg/m3
- Provided with 10 meters of cable.
- Single-phase models are provided with level switch and start terminal box with capacitor.
- Pump body: G20 Cast iron
- Motor cover: G20 Cast iron
- Impeller: G20 Cast iron
- Shaft: ‘AISI 416’ Stainless steel
- Mechanical seal: - Lower side (pump): Silicon Carbide. - Upper side (motor): Alumina/Graphite.
- Screws: Stainless steel
- O’rings: NBR
- Handle: Stainless steel
PAF20
Submersible electro-pump for residual water
APPLICATIONS
- Submersible electropumps especially indicated for pumping of waste water, sewage, septic tanks and water treatment plants
- Type: Submersible
- Flow (m3/h): 135 - 3
- Head (m): 4 - 31
- rpm: 2850
- IP: 68
- Isolation: F
- Cooling: Oil and pumped water
- Temp. max.(ºC): 40
- Max. Immersion depth: 20 m.
- Impeller: Single-channel
- Ø Solids: 50 mm
- All models are supplied with 10 m of electric cable and counter-flange for assembly with o’ring and screws.
- Supplied with support base for mobile installation or optionally with coupling foot for fixed installation.
- None of the models includes level switch.
- All the single-phase models include terminal box with capacitor.
- Pump body: Cast iron
- Motor cover: Cast iron
- Impeller: Cast iron
- Shaft: ‘AISI 304’ Stainless steel
- Mechanical seal: Lowe side (pump): Silicon carbide, Upper side (motor): Ceramic/Graphite
- Screws: A2 Stainless steel
- O’rings: NBR
AT
Submersible electro-pump for residual water
APPLICATIONS
- Submersible electropumps of robust construction, suitable for different fluids such as: clean water, rain water, mixed water, waste water with suspended solids and fibrous content, muddy water, etc.
- Type: Submersible
- IP: 68
- Isolation: F
- Cooling: Oil and pumped water
- Temp. max.(ºC): 40
- Max. Immersion depth: 20 m.
- pH: 6 - 10
- Max. starts: 15/h
- Max. sound level: 70 dB (A)
- All models are supplied with 10 m of electric cable and counterflange for assembly with o’ring and screws.
- The counter flange kit with gasket and screws, the support base for mobile installation and the coupling foot for fixed installation are not included with the pump and are supplied separately.
- All pumps are equipped with 2 thermal sensors (T1/T2) in the winding which display the temperature inside the motor, and an electrode (S) wich produces a signal revealing a fluid infiltration in the mechanical seal chamber. These sensors should be correctly connected to the suitable control panel, which is not included with the pump.
- The represented hydraulic characteristics are valid for fluids with density <1,1 kg/dm3.
- Rotation direction: Clockwise from the upper side.
- Pump body: G25 Cast iron
- Motor casing: G25 Cast iron
- Motor cover: G25 Cast iron
- Impeller: G25 Cast iron
- Shaft: ‘AISI 420’ Stainless steel
- Mechanical seal: - Lower side (pump): Silicon Carbide/Viton. - Upper side (motor): Ceramic/Graphite.
- Screws: ‘AISI 304’ Stainless steel
- O’rings: Viton
- Pump mounted on support base for mobile operations in emergency cases.
- The pump must work completely or partially plunged in the intervals 1 and 2 defined in the technical characteristics.
- The plunged stationary installations with two guide rails allow the automatic coupling of the pump at the foot of channeling and evacuation of the fluid.
- The sealing of the installation is guaranteed by the pump’s own weight.
- The pump can be easily extracted for works of maintenance without needing to enter in the working area.
- The pumps must work completely or partially plunged in the intervals 1 and 2 defined in the technical characteristics.
LFC
Surface and semi-submersible electric pumps for wastewater
APPLICATIONS
- Electro-pumps suitable for pumping dirty and waste water with solid particles.
- Likewise, thanks to their making and design, they are irreplaceable in the food industry (macerated substances, fruit pulp, slaughterhouse waste, etc.), agricultural and livestock industry (manure, purines, etc.), paper and cellulose industry (particles of cellulose paper, pulp, pasted-water, etc.), chemical industry (waste water with chemical products, brine, alkaline water, etc.), construction industry (drainage, tank emptying, etc.)
- Type: Waste water
- Flow (m3/h): 2 - 180
- Head (m): 2 - 30
- Stardard: ICE
- IP: 55
- Isolation: F
- r.p.m.: 1450 - 2850
- Cooling: External ventilation
- Rotation direction: Clockwise
- Pump body: Cast iron
- Impeller: Cast iron (F) / Bronze (L)
- Shaft: ‘AISI 420’ Stainless steel
- Screws: Stainless steel
- For dirty liquids or loaded with suspended solid particles.
- The liquid to be pumped should not have elements such as long fibers or similar which may result in braids.
- For loaded liquids with high quantity of gas or air containing suspended solid particles and mixtures resulting in braids.
- Free pitch for solids with Ø equivalent to the pump’s discharge and suction outlets.
TRITURANT130
Submersible electro-pump for residual water
APPLICATIONS
- Submersible electro-pumps with grinding system suitable for the disposal of domestic waste water.
- Type: Submersible
- Flow (m3/h): 3 - 22,8
- Head (m): 2 - 14
- rpm: 2850
- IP: 68
- Isolation: F
- Cooling: Mineral oil and pumped water
- Temp. max. (ºC): 40
- Impeller: Grinder
- Provided with 10 meters of cable.
- Single-phase models are provided with level switch, thermal protection, capacitor, circuit breaker and ON-OFF switch.
- Pump body: G25 Cast iron
- Motor casing: ‘AISI 304’ Stainless steel
- Motor cover: G25 Cast iron
- Impeller: G25 Cast iron
- Grinder: Hardened ‘AISI 440’ stainless steel
- Shaft: ‘AISI 420’ Stainless steel
- Mechanical seal: Silicon Carbide
- Screws: ‘AISI 304’ Stainless steel
TRITURANT
Submersible electro-pump for residual water
APPLICATIONS
- Submersible electro-pumps suitable for low flowrates at high manometric head.
- Thanks to its grinding system, they are suitable for waste water drainage in the civil, industrial, sanitary and agricultural sectors.
- Type: Submersible
- Flow (m3/h): 0 - 21,6
- Head (m): 9,9 - 54,6
- IP: 68
- Isolation: F
- rpm: 2900
- Cooling: Dielectric oil
- Temp. max. (ºC): 40
- Max. inmersión depth: 20 m.
- All models are supplied with 10 m. of electric cable, counter-flange for assembly with joint and screws and support base.
- All the single-phase models include terminal box with capacitor and circuit breaker.
- None of the models includes level switch.
- Pump body: Cast iron
- Impeller: Cast iron
- Shaft: ‘AISI 304’ Stainless steel
- Mechanical seal: Lower side (pump): Silicon Carbide. - Upper side (motor): Ceramic/Graphite.
- Screws: Stainless steel
- Joints: NBR
- Foot support: Zinc-plated steel
SUPERSAND
Submersible electro-pump for sump and drainage
APPLICATIONS
- Submersible electro-pumps specially designed for drainage and dewatering of muddy water in mines, open wells, drying of formwork or ditch and channel digging.
- Type: Submersible
- Flow (m3/h): 114-3,6
- Head (m): 2-35
- rpm: 2850
- IP: 68
- Isolation: B/F
- Cooling: Pumped water
- Max. Immersion depth: 30 m.
- Temp. max. (ºC): 40
- Max. density: 1100 Kg/m3
- pH: 6 - 13
- Thermal and amperimetric internal motor protection.
- All models are supplied with 10 m. of electric cable.
- Models SUPERSAND AG include a mixer for a more efficient pumping of muddy water.
- Pump body: ‘AISI 304’ Stainless steel
- Motor casing: ‘AISI 304’ Stainless steel
- Motor cover: Cast iron
- Impeller: Cast iron and hardened chrome with high resistance to abrasion (60 Rockell hardness)
- Shaft: ‘AISI 403’ Stainless steel
- Double mechanical seal: Silicon Carbide + Carbon/Ceramic
- Grid: Hardened cast iron
SRI
Submersible electro-pump for residual water
APPLICATIONS
- Submersible pumps SRI series are suitable for industrial water treatment, pumping of water with acid, sea water, petrol station waste with acid from batteries, waste water from chemical processes and all type of liquids with suspended particles in general.
- Specially necessary in the tanning industry and for chemical and pharmaceutical processes, laboratories and hospitals.
- Type: Submersible Inox
- Flow (m3/h): 2 - 69
- Head (m): 2 - 24
- rpm: 2850
- IP: 68
- Isolation: B
- Cooling: Pumped water
- Temp. max. (ºC): 40
- Max. density: 1100 kg/m3
- Max. viscosity: 100 cPs
- pH: 3 - 13
- All single-phase models are supplied with built-in level switch.
- All models are supplied with 10 mt of santoprene cable with cable gland for higher protection against very aggressive liquids.
- Pump body: ‘AISI 316’ Stainless steel
- Impeller: ‘AISI 316’ Stainless steel
- Shaft: ‘AISI 316’ Stainless steel
- Screws: ‘AISI 316’ Stainless steel
- Double mechanical seal: Silicon Carbide/Siicon Carbide/Viton
- O’rings: Viton
