Submersible electro-pump for drainage
- Submersible electro-pump suitable for water collection up to 2mm. minimum level thanks to the impeller design. Suitable for floodings in basements, garages and lifts, rain water collection and emptying of swimming-pools.
- Type: Submersible
- Flow (l/h): 500 - 7000
- Height (m): 0 - 7
- rpm: 2900
- IP: X8
- Isolation: B
- Cooling: Pumped water
- Temp. max. (ºC): 35
- Max. Immersion depth: 5 m.
- Impeller: Opened
- Provided with 10 meters of wire and hose outlet fitting.
- Built-in thermo-amperimetric protection.
- Includes new electronic vertical level switch with possibility to select different levels (3) for the automatic pump start.
- The pump stops 1 minute after the water level is lower than the selected position in the level switch.
- The level switch has a position to make the pump to work in manual mode (without automatic stop).
- Pump body: Polypropylene
- Suction foot: Stainless steel
- Impeller: Noryl
- Shaft: ‘AISI 420’ Stainless steel
- Mechanical seal: Ceramic/Graphite