+34 93 574 30 84
  • Facebook
  • Twitter
  • LinkedIn
  • Instagram
  • YouTube
  • Español
  • Français
  • English

Equipos de aireación y agitación para aguas residuales

Equipos indicados para la agitación/aireación de aguas residuales.

  • Equipos de aireación aguas residuales serie OXIGENADORES ideales para todo tipo de oxigenación de efluentes orgánicos, lodos, fosas sépticas, disminución de olores en balsas, reducción de espumas y resto de procesos industriales en los cuales sea necesaria una aportación extra de oxígeno.
  • Equipos de agitación para aguas residuales serie AGITADORES apropiados para la homogeneización de fangos y líquidos con sólidos en suspensión, ideales para evitar sedimentaciones en fosas sépticas, dépositos de trasvase de aguas residuales, etc.

OXIGENADORES

Waste water aeration devices

APPLICATIONS
  • Devices for the agitation/aeration of waste water.
  • Suitable for all kinds of oxygenation of organic effluent, sludges, septic tanks, reduction of odours in pools and basins, reduction of foams and other industrial processes where it is necessary to add extra oxygen.
  • These devices are based on the Venturi effect, which involves the entry of surface air into the fluid to be treated, achieving an optimum mixture of agitation/aeration in the facility.
TECHNICAL CHARACTERISTICS
  • Type: Submersible
  • IP: 68
  • Isolation: F
  • Hz: 50
  • Cooling: Dielectric oil
  • Temp. max. (ºC): 40
  • Ø Solids: 20 mm
  • Max. density: 1100 Kg/m3
  • pH: 6 - 10
  • All models are supplied with 10 m. of electric cable and counterflange for assembly with gasket and screws.
  • Supplied with Venturi but without vertical pipe for air suction.

AGITADORES

Waste water agitation devices

APPLICATIONS
  • Submersible agitators suitable for the homogenisation of silts and liquids containing suspended foreign bodies.
  • Ideal for avoiding sedimentation in septic tanks, waste water transfer tanks, etc.
  • Maximum capacity of Oxygen addition 45Kg/h.
TECHNICAL CHARACTERISTICS
  • Type: Submersible
  • IP: 68
  • Isolation: F
  • Hz: 50
  • Cooling: Pumped water
  • Temp. max. (ºC): 40
  • Max. immersion depth: 20 m.
  • pH: 6 - 10
  • Motors are equipped with 2 thermal sensors (T1/T2) in the winding which display the temperature inside the motor, and an electrode (S) wich produces a signal revealing a fluid infiltration in the mechanical seal chamber. These sensors should be correctly connected to the suitable control panel, which is not included with the pump.
MATERIALS
  • Motor casing: GG25 cast iron
  • Propeller support: GG25 cast iron
  • Propeller: GG25 cast iron
  • Shaft: ‘AISI 420’ Stainless steel


Valid HTML5 ¡CSS Válido!