SWITCHMATIC
Electronic pressostats
SWICHMATIC
- New electronic pressure switch with integrated digital pressure sensor and manometer.
- Version 2 for full control and protection of the pump, replacing the functions of the pressure switch, pressure gauge, electrical protection panel and level switch.
- Version 3 is used through an electrical panel similar to that of a conventional pressure switch.
- Supply voltage: 1~110/230 Vac (50/60Hz)
- I max.: 16A (230V), 30A (110V)
- P. Start: 0,5 - 7,0
- P. Stop: 1,0 - 8,0
- Min. Differential: 0,5 - 1,5
- Factory settings: 3,0 - 4,0
- Connection: G 1/4" H/F
- IP: 55
- Max. temp. Water: 50ºC
- Supply voltage: 3~230/400 Vac (50/60Hz)
- I max.: 10A (400V), 16A (220V)
- P. Start: 0,5 - 11,5
- P. Stop: 1,0 - 12,0
- Min. Differential: 0,5
- Factory settings: 3,0 - 4,0
- Connection: G 1/4" H/F
- IP: 55
- Max. temp. Water: 50ºC
- Supply voltage: 1~48/230 Vdc/Vac (50/60Hz)
- I max.: 10A
- P. Start: 0,5 - 7,0
- P. Stop: 1,0 - 8,0
- Min. Differential: 0,5 - 1,5
- Factory settings: 3,0 - 4,0
- Connection: G 1/4" H/F
- IP: 55
- Max. temp. Water: 50ºC
- New 3-way fitting with built-in SWITCHMATIC-2 electronic pressure switch system and check valve.
- To be directly installed with the electro-pump.
- Type: Electronic pressure switch Kit
- Supply voltage: 1~110/230 Vac (50/60Hz)
- I max.: 16A (230V), 30A (110V)
- IP: 55
- Max. temp. Water: 50ºC
- Connexions: G 1"H x 1"H x 1"M
- Built-in digital manometer with reading in bar and psi (3-digit display)
- Easy pressure adjustment for the start and stop
- Instantaneous current reading (A)
- Protection agains lack of water by consumed current
- Protection against overcurrent
- Protection against fast operation cycles
- Synchronizable for 2-pumps equipments with alternation
- Manual commisioning button
- Automatic restart (ART function) and manual (RESET)
- Operation as conventional pressure switch or inverted (NO/NC).
- Voltage-free contact to monitor alarms
- Standby mode with low power consumption
