Discontinued - Products

HM70-4

horizontal one-piece centrifugal electro-pumps

APPLICATIONS

Silent electro-pumps suitable for small units for home pressure, semidetached houses and spray irrigation

TECHNICAL CHARACTERISTICS

Close-coupled pump

Enclosed motor with external ventilation

IP-44 Protection

F-type isolation

Shaft and stainless steel shell

Aspiration cover and junction body in grey casting

Noryl impellers

Noryl diffuser with stainless steel friction ring

High quality mechanical seal

Maximum water temperature 40ºC

Nota: Our Liderbox pressure units can be mounted with these models

BARI

horizontal one-piece centrifugal electro-pumps

APPLICATIONS

Silent electro-pumps suitable for household small pressure units, single-family houses and lawn sprinkler

MATERIALS

Stainless steel impeller, sleeve and shaft

Aspiration cover and junction body in grey casting

Polycarbonate diffusers with fiber glass

High quality mechanical seal

TECHNICAL CHARACTERISTICS

Close-coupled pump

Enclosed motor with external ventilation

IP-44 Protection

F-type isolation

Maximum water temperature 40ºC

VIENA

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS

Very silent electropumps, ideal for small household pressure units, single-family houses and lawn sprinkler.

MATERIALS

AISI 420 stainless steel shaft

Suction cover and body in grey cast iron

AISI 304 stainless steel impellers and sleeve

Polycarbonate diffusers with fiberglass

High quality mechanical seal

TECHNICAL CHARACTERISTICS

Close-coupled multistage pumps

Enclosed motor with external ventilation

Incorporated thermal protector

IP-55 protection

F class insulation

Maximum water temperature 40ºC

Nota: Our Vienabox pressure units can be assembled with these models

MI316

horizontal one-piece centrifugal electro-pumps

APPLICATIONS

Electro-pumps completely made of AISI 316 stainless steel, suitable for the food industry , water treatments, small home pressure units, single-family houses, etc.

MATERIALS

Pump body, diffusers, diffuser covers, pump-motor joint body, impeller, shaft and primer plugs in AISI 316 stainless steel

O-rings in EPDM

Mechanical lock of ceramics/coal/EPDM

TECHNICAL CHARACTERISTICS

Close-coupled pump

Enclosed motor with external ventilation

IP-55 Protection

F-type isolation

Maximum water temperature 110 ºC

IHM

horizontal one-piece centrifugal electro-pumps

APPLICATIONS

Silent electro-pumps suitable for small household pressure units, single-family houses and lawn sprinkler

MATERIALS

Stainless steel shaft and body pump

Stamped brass pump-motor junction body

Stainless steel impellers

Polycarbonate diffusers

High quality mechanical seal

TECHNICAL CHARACTERISTICS

Close-coupled pump

Enclosed motor with external ventilation

IP-44 Protection

F class isolation

Maximum water temperature 50 ºC

Nota: Our Liderbox pressure units can be mounted with these models

BMO

Horizontal close-coupled centrifugal electro-pumps

APPLICATIONS

Standardized electro-pumps suitable for large pressure units, irrigation in general, air-conditioning systems (heating and cooling), fire protection, industry and water supply in general

MATERIALS

Stainless steel shaft

Pump body and impeller in G25 iron casting

Mechanical seal of ceramics-graphite

TECHNICAL CHARACTERISTICS

Single-impeller close-coupled electro-pump with standardized pump body according to standards DIN 24255 and UNI 7467

Enclosed asynchronous motor with external ventilation, suitable for continuous service

IP-55 Protection

F class insulation

Voltage 230/400 V. up to 5.5 CV and 400/690 V. from 7.5 CV

Water temperature from -30 ºC to 105 ºC

Counterflanges, joints and screws are NOT provided with this model

Nota: All these models can be completely manufactured in MARINE BRONZE or AISI 316 STAINLESS STEEL

RGT430

horizontal one-piece centrifugal electro-pumps

APPLICATIONS

Close-coupled electro-pumps specially designed for drip irrigation and open channel in general. Any installation where large flows at low pressures are required.

TECHNICAL CHARACTERISTICS

Close-coupled pump

Enclosed motor with external ventilation at 1450 r.p.m.

IP-55 Protection

F-type isolation

Stainless steel shaft

Pump body and pump-motor joint body in grey casting

Impeller in bronze

High quality mechanical seal

Maximum water temperature 80ºC

Upon request all models can be supplied in MARINE BRONZE

Counter flanges are not provided in these models

Nota: Contact our technical department for higher performance.

RGT75

horizontal one-piece centrifugal electro-pumps

APPLICATIONS

Standardized electro-pumps specially designed for drip irrigation and open channel in general. Any installation where large flows at low pressures are required.

TECHNICAL CHARACTERISTICS

Single-impeller close-coupled electro-pump with standardized pump body according to standards DIN 24255 and UNI 7467

Motor with external ventilation

IP-44 Protection, F-type isolation

Stainless steel shaft

Pump body and impeller in grey casting

High quality mechanical seal

Maximum water temperature 90ºC

Provided with counter flanges standard UNI 2236

Upon request all models can be supplied in MARINE BRONZE

Nota: Contact our technical department for higher performance.

CEA

horizontal one-piece centrifugal electro-pumps

APPLICATIONS

Centrifugal electro-pumps completely made in AISI 304 stainless steel, suitable for industrial use, non-chemically aggressive liquid line and hot and cold water recirculation

MATERIALS

Pump body, impeller, diffuser, mechanical lock disk and AISI 304 stainless steel shaft and primer plugs

High quality mechanical closing

TECHNICAL CHARACTERISTICS

Close-coupled pump

Enclosed motor with external ventilation

IP-55 Protection

F-type isolation

Maximum water temperature 85 ºC

MEGACC24V

24 V direct current electro-pumps

APPLICATIONS

Self-primingelectro-pump specially for pressure units in vessels where water pressure needs to be increased

MATERIALS

AISI 304 stainless steel pump body

Impeller, ejector diffuser and venturi tube in plastic

Stainless steel motor shaft

High quality mechanical seal

TECHNICAL CHARACTERISTICS

Self-priming electro-pumps

Enclosed motor with external ventilation

IP-44 Protection, F-type isolation

Maximum water temperature 35 ºC

PUMA

Self-suction electro-pumps for swimming-pool

APPLICATIONS

Self-suction centrifugal electro-pumps with complete prefilter, suitable for water recirculation and filtering for small and large swimming-pools

MATERIALS

AISI 420 stainless steel shaft

Pump body, base, diffuser and pump-motor joint body in polypropilene reinforced with fiberglass

Impeller in Noryl, with fiberglass charge

Joints in NBR

Prefilter cover in transparent polycarbonate

Mechanical seal in graphite and aluminium oxide

Motor casing in aluminium

TECHNICAL CHARACTERISTICS

Self-suction centrifugal electro-pumps with incorporated prefilter

Enclosed motor with external ventilation

IP-55 protection, F-type isolation

Single-phase motor with incorporated thermal protection

Maximum water temperature 40 ºC

Motor winding impregnated in epoxi varnish

All models incorporate default two-piece suction and pressure fittings

PANTHER

Self-suction electro-pumps for swimming-pool

APPLICATIONS

Self-priming centrifugal electro-pumps with basket prefilter suitable for swimming-pool cleaning equipments

MATERIALS

AISI 420 stainless steel shaft

Pump body, foot, diffuser and pump-motor union body in polypropilene reinforced with fiberglass

Impeller in Noryl, with fiberglass load

Joints in NBR

Prefilter cover in transparent polycarbonate

Mechanical seal in graphite and aluminium oxide

Electrophoresis motor paint which assures high resistance to corrosion

TECHNICAL CHARACTERISTICS

Self-priming centrifugal electro-pumps with built-in prefilter

Enclosed motor with external ventilation

IP-55 protection, F class insulation

Single-phase motors with incorporated thermo-amperimetric protection

Maximum water temperature 40 ºC

Sound intensity lower than 65 dBA (PANTHER 150, 80 dBA)

All models are provided with default gluing fittings and key for prefilter cover opening

TIGER

Self-suction electro-pumps for swimming-pool

APPLICATIONS

Self-priming centrifugal electro-pumps with basket prefilter suitable for swimming-pool cleaning equipments

MATERIALS

AISI 420 stainless steel shaft

Pump body, foot, diffuser and pump-motor union body in polypropilene reinforced with fiberglass

Impeller in Noryl, with fiberglass load

Joints in NBR

Prefilter cover in transparent polycarbonate

Mechanical seal in graphite and aluminium oxide

Electrophoresis motor paint which assures high resistance to corrosion

TECHNICAL CHARACTERISTICS

Self-priming centrifugal electro-pumps with built-in prefilter

Enclosed motor with external ventilation

IP-55 protection, F class insulation

Single-phase motors with built-in thermoamperimetric protection

Maximum water temperature 40 ºC

Maximum sound intensity: 80 dBA

All models are provided with default gluing fittings and tube for opening and closing the prefilter cover

PETUNIA

Self-suction electro-pumps for swimming-pool

APPLICATIONS

Self-suction centrifugal electro-pumps with basket prefilter suitable for swimming-pool water-cleaning equipments

MATERIALS

Stainless steel shaft

Pump body in Permaglass reinforced with fiberglass and prefilter cover in transparent makrolon

Joint body, diffuser and impeller in Noryl

High quality mechanical seal

TECHNICAL CHARACTERISTICS

Self-suction pumps with incorporated prefilter

Enclosed motor with external ventilation

IP-54 protection

F-type isolation

Maximum water temperature 40 ºC

PTF423

Centrifugal electro-pumps for swimming-pool

APPLICATIONS

High performance centrifugal electro-pumps , suitable for large filtration installations

TECHNICAL CHARACTERISTICS

Close-coupled pumps

Enclosed motor with external ventilation at 1450 r.p.m.

IP-55 Protection

F-type isolation

Shaft and basket in stainless steel

Pump body, pump-motor joint body and prefilter in grey casting

Impeller in bronze

High quality mechanical seal

Maximum water temperature 80ºC

Upon request all models can be supplied of MARINE BRONZE

Counter flanges are not provided with these models

Nota: Contact our technical department for higher performance.

JAGUAR

Self-priming electro-pumps for swimming-pools

APPLICATIONS

Self-priming centrifugal electro-pumps with basket prefilter suitable for swimming-pool cleaning equipments. Suitable for working with salt water. All models include built-in key for opening the prefilter cover and fittings for gluing.

TECHNICAL CHARACTERISTICS

Type: Swimming pools

Flow (l/h): 26000 - 6000

Height (m).: 4 - 18

r.p.m.: 2850

IP: 55

Isolation: F

Cooling: External ventilation

Temp. max. (ºC): 40

Max. suction depth: 2 m.

Sound intensity: 70 dBA

MATERIALS

Pump body: Polypropylene with glass fiber

Motor casing: Aluminium

Mechanical seal: Polyamide with glass fiber

Impeller: Noryl® with glass fiber

Diffuser: Luranyl with glass fiber

Shaft: ‘AISI 316’ Stainless steel

Mechanical seal: Alumina/Graphite/AISI 316

Pre-filter cover: Polycarbonate

Support base: Polypropylene with glass fiber

O’rings: NBR

Screws: Stainless steel

EF

Filtering equipments for swimming-pools

APPLICATIONS

Compact filtering equipments, suitable for private swimming-pools

DESCRIPTION

Equipment composed of filter, pump, valve, bench and filter-pump connections

TECHNICAL CHARACTERISTICS

Plastic flange for filter cover lock

Collectors and diffuser of inalterable plastic assembled in the filter

Selector valve of 6 positions with built-in manometer

Flexible hose union filter/pump in PVC

Equipment assembled with swimming pool pumps

SUPERSKIMMER

Accessories for swimming-pools - Skimmers

APPLICATIONS

Skimmer for concrete swimming-pools with round or square cover

LIMPIAFONDOS

Accessories for swimming-pools - Bottom-cleaner

APPLICATIONS

Aluminium manual bottom-cleaner with pole hook through locking handles, for hose diameter 38 or 50

MANGUERA

Accessories for swimming-pools - Hoses

APPLICATIONS

Self-floating hose for bottom-cleaner diameter 38 mm with length from 8 to 15 meters

RECOGEHOJAS

Accessories for swimming-pools - Collector

APPLICATIONS

Leave-collector with bag for bottom-cleaning of swimming-pools and flat for surface cleaning, with pole hook through locking handles

CEPILLOS

Accessories for swimming-pools - Brushes

APPLICATIONS

Brush for cleaning swimming-pools, straight or curve-shaped, with pole hook through locking handles

ROMA10-20

Vertical multicellular centrifugal electro-pumps

APPLICATIONS

Electro-pumps suitable for the installation of pressure and fire protection units due to its vertical position and small size

MATERIALS

Impeller and sleeve in AISI 304 stainless steel

AISI 320 stainless steel shaft

Suction and impulse body in grey casting

Diffusers in polycarbonate with fiberglass

High quality mechanical seal

TECHNICAL CHARACTERISTICS

Close-coupled vertical pumps

Enclosed motor with external ventilation

IP-44 protection

F class insulation

Maximum water temperature 35 ºC

All models are supplied with corresponding counter flanges, screws and joints

BOQUILLAS

Accessories for swimming-pools - Nozzles

APPLICATIONS

Impulse, suction and hose linking nozzle for concrete swimming-pools .

VSG

Vertical multicellular centrifugal electro-pumps

APPLICATIONS

Vertical multistage inline electropumps, suitable for water supply in industrial and civil engineering applications, irrigation systems, supplies to residential areas, pressure equipments, Osmosis plants and air-conditioning systems.

With support base and flanges made in cast iron.

TECHNICAL CHARACTERISTICS

Type: Multistage stainless steel

Flow (l/h): 1000 - 58000

Height (m): 12 - 236

IP: 55

Isolation: F

r.p.m.: 2850

Cooling: External ventilation

Temp. max. (ºC): -20/+120

Impeller: Closed

MATERIALS

Base of support: Cast iron

Union body: Cast iron

Housing: ‘AISI 304’ Stainless steel

Impellers: ‘AISI 304’ Stainless steel

Diffusers: ‘AISI 304’ Stainless steel

Shaft: ‘AISI 316’ Stainless steel

Mechanical seal: Carbon/Silicon/AISI316/EPDM

Nota: All the pumps are supplied with their corresponding flanges, suction and discharge counter-flanges, screws and joints.

VIX

Vertical multicellular centrifugal electro-pumps

APPLICATIONS

In-line multistage vertical electro-pumps, suitable for water supply in industrial and civil applications, irrigation systems, residential areas and pressure equipments. Highly suitable for working with liquid chemicals.

TECHNICAL CHARACTERISTICS

Type: Multistage stainless steel

Flow (l/h): 2400 - 24000

Height (m): 6,9 - 222

IP: 55

Isolation: F

r.p.m.: 2850

Cooling: External ventilation

Temp. max. (ºC): -30 / +120

Impeller: Closed

MATERIALS

Pump body: ‘AISI 304’ Stainless steel

Base of support: Aluminium

Shaft coupling: Aluminium / Cast iron

Housing: ‘AISI 304’ Stainless steel

Impellers: ‘AISI 304’ Stainless steel

Diffusers: ‘AISI 304’ Stainless steel

Shaft: ‘AISI 304’ Stainless steel

Plugs: ‘AISI 316’ Stainless steel

Mechanical seal: Silicon carbide / Carbon / EPDM

Juntas: EPDM

All pumps are supplied with corresponding suction and discharge fl anges, screws and joints in ethylene-propylene.

Nota: Upon request, all models can be supplied in AISI 316 stainless steel.

TAV

Vertical multicellular centrifugal electro-pumps

APPLICATIONS

High performance vertical electro-pumps suitable for large pressure equipments and fire-protection.

TECHNICAL CHARACTERISTICS

Type: Multistage

Motor Stardard: NEC B-14 (TAV-37), NEC B-5 (TAV-73), NEC B-5 (TAV-95)

Flow (l/h): 2000 - 47000

Height: 20 - 150

IP: 55

Isolation: F

r.p.m.: 2850

Cooling: External ventilation

Temp. max. (ºC): 50

Turbina: Closed

MATERIALS

Suction body: Cast iron

Discharge body: Cast iron

Union body: Cast iron

Housing: Stainless steel

Impellers: TAV-37-73: Injected Noryl with insertions of bronze, TAV-95: Noryl

Diffusers: TAV-37-73: Injected Noryl with insertions of bronze, TAV-95: Cast iron

Shaft: Stainless steel

Mechanical seal: Ceramic/Coal

Nota: These models can not work in dry conditions so installation in charge is recommended. Upon request all models can be supplied with suction and discharge fl ange on the same side.

INLINE

Vertical multicellular centrifugal electro-pumps

APPLICATIONS

Silent vertical electro-pumps for housing pressure units, fire-protection units and irrigation systems in general

TECHNICAL CHARACTERISTICS

Multistage vertical pumps with coupling

Enclosed motor with external ventilation

IP-54 protection

F-type isolation

Impeller, shaft, shell and coupling protection grid in AISI 304 stainless steel

Diffusers in Noryl

Suction-impulse body and coupling pump-motor in grey casting

High quality mechanical seal

Maximum water temperature 35ºC

Pumps are supplied with corresponding suction and impulse flanges

SPLIT

Multicellular centrifugal submersible electro-pumps

APPLICATIONS

Multistage submersible electro-pumps suitable for domestic installations in open wells

TECHNICAL CHARACTERISTICS

Submersible electro-pump with water-cooled motor

IP-68 protection. F-type isolation

AISI 420 stainless steel motor shaft

Diffusers in Noryl with fiberglass

Impellers (Except split 43M in Noryl) and AISI 304 stainless steel covering

Impulse body SPLIT 43 and 45 in polyamide

Impulse body SPLIT 55, 57, 74, and 76 in AISI 304 stainless steel

Double mechanical seal in coal/ceramics

Maximum water temperature 35ºC

Provided with 10-meters-long wire

All single-phase models are provided with built-in level switch

Nota: Models SPLIT 43M and SPLIT 45M pumps can not be placed more than 8 mts. under water surface level

4P

Multicellular centrifugal submersible electro-pumps

APPLICATIONS

Submersible pumps for wells of 4” in diameter and clear water, suitable for civil and industrial applications, irrigations, population supply, industrial facilities, etc.

MATERIALS

Pump sleeve and shaft in stainless steel

Impulse and suction body in brass

Radial or semiaxial impellers and diffusers in polycarbonate

TECHNICAL CHARACTERISTICS

Franklin electrical motor (water-covered rotor) or motor in non-toxic oil bath

All M type are single-phase 230 V models and are provided with capacitor

All three-phase models are provided at only one voltage 230 or 400 V.

The maximum number of starts in Franklin motors is 12 and 30 for three-phase up to 1,5 CV.

Retention valve built-in all models.

Maximum water temperature 30 ºC

It is necessary to protect the pump against the lack of water. It can not be run dry.

Nota: The minimum distance between the pump and the well bottom must be 30 cm. Do not use the pump in water with sand content higher than 30 gr./m³

4PFLOTANTE

Multicellular centrifugal submersible electro-pumps 4

APPLICATIONS

MATERIALS

ASI 304 stainless steel pump sleeve, shaft, cable protector and suction and impulse bodies.

Floating impellers in Noryl

Fiberglass-reinforced diffusers in polycarbonate

Retention valve built-in in all models

TECHNICAL CHARACTERISTICS

Franklin electrical motor (water-covered rotor) or atoxic-oil covered motor

All M types are single-phase voltage 230 V. and are provided with capacitor

All T types are three-phase voltage and are provided to one only voltage 230 or 400 V.

12 as maximum number of starting-up in single-phase motors and 30 for three-phase motors up to1,5 CV.

Maximum water temperature 30 ºC

It is necessary to protect the pump against the lack of water. It can not be run dry

Nota: The minimum distance between the pump and the well bottom must be 30 cm. Do not use the pump in water with sand content higher than 150 gr./m³

KIT-PISA

Multicellular centrifugal submersible electro-pumps 4

APPLICATIONS

Multistage submersible pump PISA for 4’’ wells designed for the lifting of clean water, suitable for small irrigation installations and domestic use. H07 cable. Pump fixing rope. 1” check valve. Electrical switchboard with capacitor, thermal protection, ON-OFF switch and cable with plug, only in single-phase models.

TECHNICAL CHARACTERISTICS

Type: Submersible

Ø Pump: 99 mm

IP: 68

Isolation: F

r.p.m.: 2800

Cooling: Mineral oil and pumped water

Temp. max. (ºC): 35

Max. immersion depth: 40 m.

Impeller: Closed

Max. sand content: 60 gr/m3

Max. starts: 40/h

MATERIALS

Pump housing: ‘AISI 304’ Stainless steel

Suction grill: ‘AISI 304’ Stainless steel

Motor housing: ‘AISI 304’ Stainless steel

Handle: ‘AISI 304’ Stainless steel

Impellers: Noryl with glass fiber

Diffusers: Noryl with glass fiber

Shaft: ‘AISI 420’ Stainless steel

Mechanical seal: Graphite/Alumina

MICROFONTIRETE

Multicellular centrifugal submersible electro-pumps

APPLICATIONS

Submersible electro-pumps for direct current, suitable for fresh and salt water.

TECHNICAL CHARACTERISTICS

Type: Submersible

Cooling: Pumped water

Temp. (ºC): 60

Max. Continuous operation time: 20 min.

Waiting time until next start: 20 min.

MOPA50

Submersible electro-pump for sump and loaded water

APPLICATIONS

Sumersible electro-pump suitable for water collection up to 2mm. mimimum level thanks to the impeller design. Suitable for floods in basements, garages and lifts, rain water and emptying of swimming-pools.

TECHICAL CHARACTERISTICS

Sumersible pump

Motor cooled by the same pumped water

IP-68 protection

Built-in thermo-amperometric protection

External casing and suction grid in stainless steel

Impeller in Noryl

Top handle in polypropylene

High quality mechanical seal

Maximum water temperature 35ºC

Provided with 10 meters-long wire

Provided with retention valve and hose connection (25/30/35 mm)

Level switch + fixation on external casing to cancel it are included

DRAINAGE MINIMUM LEVEL: 2 mm

STARTING-UP AND CORRECT PUMP PERFORMANCE MINIMUM LEVEL: 5 cm

MOPA

Submersible electro-pump for sump and loaded water

APPLICATIONS

Submersible electro-pump suitable for water collection up to 2mm. minimum level thanks to the impeller design. Suitable for floodings in basements, garages and lifts, rain water collection and emptying of swimming-pools.

MATERIALS

Stainless steel external casing and suction grid.

Impeller in Noryl

Polypropylene upper handle.

High quality mechanical seal

TECHNICAL CHARACTERISTICS

Submersible pump

Motor cooled by the same pumped water

IP-68 protection and F class insulation.

Built-in thermo-amperimetric protection

Maximum water temperature 35 ºC

Provided with 10 meters of cable

Includes level switch and fixation on the sleeve to nullify it.

Includes retention valve and hose fitting (25/30/35mm).

Nota: MINIMUM DRAINAGE LEVEL: 2 mm. MINIMUM STARTING-UP LEVEL AND CORRECT PUMP PERFORMANCE: 5 cm.

SUB3500

Submersible electro-pump for sump and loaded water

APPLICATIONS

SUB 3500 AUT: submersible electro-pump suitable for bailing of rain water, drainage inlets and ponds

SUB 7500 AUT: submersible electro-pump suitable for the bailing of water with particles or small suspended solids

MATERIALS

External casing in polypropilene

Impeller in Noryl

Shaft and motor internal casing in stainless steel

High quality mechanical seal

TECHNICAL CHARACTERISTICS

Motor cooled by the same pumped water

IP-X8 protection. B-class insulation

Built-in thermo-amperimetric protection

Maximum water temperature 35 ºC

Provided with 10 meters of wire, level switch and hose outlet fitting

Maximum immersion depth: 5m

OPTIONAL ACCESSORIES

HOSE KIT

7m of discharge hose Ø Exterior 25 mm

1'' 1 1/4'' coupling elbow pump-hose

SUMINOX

Submersible electro-pump for loaded water

APPLICATIONS

Turbo 100 D: Submersible electro-pump suitable for water bailing, waste water, faecal water and septic tanks

TECHNICAL CHARACTERISTICS

Submersible pumps

Motor cooled by the same pumped water

IP-68 protection. F-type isolation

Built-in thermo-amperometric protection

All components of the pump are in AISI 304 stainless steel

Double lock with intermediate oil chamber (lock in silicon carbide in the pump part and oil seal in the motor part)

Maximum operation temperature 50 ºC

Provided with 10 meters of wire and level switch

TRITURANT140

Submersible electro-pump for residual water

APPLICATIONS

Submersible electro-pumps with shredding system suitable for domestic waste water drainage

TECHNICAL CHARACTERISTICS

Submersible pumps

Enclosed motor

Single-phase model with thermal protection and capacitor

Three-phase model for one only voltage at 230 or 400V.

IP-68 protection. F-type isolation

AISI 420 stainless steel shaft

AISI 304 stainless steel motor casing and screws

Pump body, impeller, middle body and motor casing in grey casting

Grinder in F-520 steel

Mechanical seal in Silicon carbide and graphite

Maximum water temperature 35ºC

PH of the liquid to be pumped from 6 to 11

Provided with 10 m. wire

TRITURANT150

Submersible electro-pump for residual water

APPLICATIONS

Submersible electro-pumps suitable for pumping low quantities of water at high manometric height. Thanks to its grinding system, they are suitable for waste water drainage in the civil, industrial, sanitary and agricultural sectors.

MATERIALS

AISI 420 stainless steel shaft

AISI 304 stainless steel screws

Casing, motor cover, pump body and impeller in grey casting G-25

AISI 416 stainless steel grinder

Pump body's mechanical seal in silicon carbide

Oil chamber mechanical seal in ceramics-graphite

TECHNICAL CHARACTERISTICS

Submersible pumps

Enclosed motor with oil bath

IP-68 protection. F class insulation.

Maximum water temperature 40 ºC

Maximum immersion depth 20 m

pH of pumped liquid from 6 to 11

Provided with 10 m cable

Single-phase models with built-in boot switchboard (without level switch).

Maximum density 1,1 Kg/dm3.

GRINDER TECHNICAL CHARACTERISTICS

Composed of fixed and mobile parts with 21 cutting points. Both parts are made in hardened stainless steel

Due to the grinder special design together with the motor speed, 60.000 grinding operations per minute are achieved

SUBC

Submersible electro-pump for dewatering and drainage

APPLICATIONS

Submersible electro-pumps suitable for mine and open wells construction, drying of formwork before concrete and ditch and channel digging

MATERIALS

Pump body, grid and motor casing in Silumin (aluminium cast).

Impeller in special casting with 60 Rockwell hardness

Motor cover and diffusers in rubber-covered Silumin.

Double mechanical seal, upper one in ceramics/graphite and lower one in silicon/silicon.

TECHNICAL CHARACTERISTICS

Submersible pump

Three-phase enclosed motor in short-circuit

Motor cooling by pumped water pitch

Motor protection by built-in magneto-thermal contactor.

Maximum water temperature 50 ºC

Provided with 10 meters of H07RN-Fcable

VTATEX

Submersible electro-pump for residual water

APPLICATIONS

Submersible electro-pumps for waste or loaded water, thanks its making under standard ATEX II 2Gd II B T4, it is specially designed for installations with atmospheres with possibility of gas creation (garages, public parking lots, shopping centres, septic tanks or water treatment plants)

TECHNICAL CHARACTERISTICS

Submersible electro-pumps

Enclosed motor with oil bath

IP-68 protection F-type isolation

Making under standard ATEX II 2Gd II B T4

Built-in humidity detection sensor and thermal protection in case of overheating

Maximum number of starting-up: 15 per hour

Maximum water temperature 40ºC

Provided with 10 meters of H07RNF x 1.5 wire

Pump body, impeller, casing and motor cover in iron casting

AISI 420 stainless steel motor shaft

Screws in AISI 304 stainless steel and joints in NBR

Double mechanical seal carbide silicon/carbide silicon in the pump side and graphite/Alumina oil-cooled in the motor side

Optional: Fixed installation with coupling base for all models

Nota: Check same models without ATEX version

EEX

Submersible electro-pump for residual water

APPLICATIONS

Submersible electro-pumps suitable for flammable liquid transfer or in potentially explosive working environments.

All this range of pumps is provided with flameproof certification in accordance with the standard ATEX EEx-d-11B-T4

It is required that the pumps work completely submerged in the liquid to be pumped , with maximum temperature at 40ºC

All our models can be installed by coupling base with guide tubes.

MATERIALS

Motor casing, pump body and impeller in G 250 casting

AISI 420 B stainless steel motor shaft

AISI 304 stainless steel screws

Cable (10mts) in Neoprene H07 RN/F

Joints and oil seal in nitrile

Mechanical seal in Silicon Carbide/Silicon

Upon request they can be provided completely in INOX AISI 316 or Marine Bronze

MOTORS

2 or 4-pole asynchronous electrical motors

Type-F motor isolation(155ºC) Protection IP 68

Motor cooling is carried out through the same fluid the pump is submerged into, the motor casing has been designed for efficient thermal dissipation.

Motor is designed for continuous or intermittent operation with no more than 15 starting-up per hour, regularly spaced in time and maximum unbalance between phases of 5%

Our models can be supplied with power II 230 v. and with level switch

MOTOR SHAFT AND BEARINGS

AISI 420 B stainless steel motor shaft dynamically balanced. Over-dimensioned bearings, radial to sphere, lubricated and free of maintenance.

MECHANICAL SEALS

The pump has two tightness systems for perfect tightness between the electrical motor and the liquid to be pumped.

Top seal: oil retainer in NBR

Bottom closing: Mechanical in Silicon Carbide

OIL CHAMBER

The oil chamber lubricates and cools the mechanical sealand emulsifies possible water leakage

TYPES OF IMPELLERS

VOROTEX: Designed for large diameters of solids at low evacuation level.

SINGLE-CHANNEL: Designed for large diameters of solids at medium evacuation level.

MULTI-CHANNEL: Designed for large diameters of solids at high evacuation level.

Nota: Please contact our technical department for higher performance

GASOLINA

Motor pumps with petrol engine

APPLICATIONS

Motor pumps suitable for gardening, agriculture and open-channel irrigations, compact and portable thanks to its built-in handle.

"MA" models are self-priming, they don’t require check valve on the suction.

All models are provided with automatic collector and plug wrench.

TECHNICAL CHARACTERISTICS

Type: Motor pumps

Flow (l/h): 3600 - 24000

Head (m): 5 - 50

Isolation: F

Cooling: Air-cooled

Fuel: Gasoline with mixture of 5% of SAE-30 oil or similar

MATERIALS

Pump body: Aluminum

Impeller: Aluminum

Shaft: Stainless steel

Mechanical seal: Ceramic/Graphite

Nota: Upon request they can be provided with diesel motor.

DIESEL

Motor pumps with diesel engine

APPLICATIONS

Motor pumps specially designed, because of its making, for public construction works, irrigations and fire units

MATERIALS

Pump body and impeller in grey casting

High quality mechanical seal

TECHNICAL CHARACTERISTICS

Motor pumps with Lombardini diesel air-cooled motor

Fuel: gas oil

Direct injection on the piston.

Fuel tank with incorporated filter.

Forced lubrication by gear pump.

Booster and stop with direct drive.

Maximum suction height 7 m.

Nota: Please contact our technical department for higher performance

R2S

Acceleration electro-pumps for heating

APPLICATIONS

Booster pumps suitable for installations of domestic and medium-type heating systems

TECHNICAL CHARACTERISTICS

Close-coupled pump

Enclosed motor with wet rotor, designed for 3-speed operation

F-type isolation

Pump body in GG-20 grey casting

Impeller in Noryl

AISI 304 stainless steel shaft and motor shell

Ceramic/graphite bearings

Maximum water temperature110ºC

Operation maximum pressure 10 Kg/ m²

Supplied with corresponding joint fittings

R2X

Acceleration electro-pumps for domestic water

APPLICATIONS

Booster pumps specially designed for sanitary hot water impulse

TECHNICAL CHARACTERISTICS

Close-coupled pump

Enclosed motor with wet rotor, designed for 1 or several speed operation

F-type isolation

Pump body in stainless steel for models R2X and in bronze for models R2B

Shaft and motor shell in AISI 304 stainless steel

Bearings in graphite

Impeller in stainless steel for R2X models and in Noryl for R2B models

Maximum water temperature 110º C

Operation maximum pressure 10 Kg/ m²

Supplied with corresponding joint fittings

HRS

Acceleration electro-pumps for heating

APPLICATIONS

Booster pumps suitable for installations of medium-type domestic heating systems and sanitary hot water

MATERIALS

Pump body in GG-20 grey casting for models HRS 25/4 and HRS 25/6, model HRS 15/6 BZ in bronze

Impeller in polypropilene

Shaft in ceramics and motor shell in AISI 304 stainless steel

Ceramic / graphite bearings

TECHNICAL CHARACTERISTICS

Close-coupled pump

Enclosed motor with wet rotor, designed for 3-speed operation

F class insulation

Maximum water temperature 110º C

Operation maximum pressure 10 Kg/ cm²

Supplied with corresponding joint fittings

NILFISK

Piston electro-pumps for high pressure

APPLICATIONS

Semi-industrial piston electro-pumps. Portable and high performance pump. Powerful and easy-to-use. Suitable for high pressure cleaning .

TECHNICAL CHARACTERISTICS

High pressure pump with 3 pistons in ceramics coating

Brass pump head

Maintenance-free motor with built-in thermal protection

By-pass valve

Continuous pressure regulation

5 m. power cable with plug

OPTIONAL ACCESSORIES

Rotating cleaning brush

Pipe plunger

NEXUS120

Piston electro-pumps for high pressure

APPLICATIONS

High performance small portable hydrocleaner. Compact, powerful and easy-to-use. Suitable for all type of domestic purposes.

TECHNICAL CHARACTERISTICS

Type: High pressure with pistons

Isolation: F

Cooling: External ventilation

COMPONENTS

Maintenance-free motor with built-in thermal protection

3 Stainless steel pistons

By-pass valve (water return)

Supply cable with plug

BUILT-IN ACCESSORIES

Pistol with trigger lock

6 m. high pressure hose

Hitch and extension hitch

Soap dispenser

Trolley

OPTIONAL ACCESSORIES

4 m. hose extension

4 m. hose pipe plunger

Rotating brush

CLEANER

Piston electro-pumps for hydraulic tests

APPLICATIONS

Small portable hydrocleaner designed for cleaning at medium pressure of air-conditioning appliances or fast and accurate checking of pressure and tightness in plumbing, heating, cooling installations,etc.

TECHNICAL CHARACTERISTICS

Type: High pressure with pistons

Isolation: F

Cooling: External ventilation

COMPONENTS

Maintenance-free motor with built-in thermal protection

3 Axial pistons

By-pass valve (water return)

Pressure regulator

5 m. cable with SCHUKO plug

Suction hose for detergent

Suction filter

Manometer

Pistol

Hitch

10 m. high pressure hose

Test-kit with manometer and valves

300x155x215 mm. carrying-case

FITOR

Electric generator

APPLICATIONS

Generators specially designed for emergency operations in pumping equipments for drainage according to CTE - HS5.

TECHNICAL CHARACTERISTICS

Close-coupled generator on furnace-painted tubular chassis with anti-vibration dampers or on bench from 10 KVA on. on.

Air-cooled diesel engine at 3000 rpm.

Electric start through battery with charge system included.

Possibility of soundproof body and water-cooled.

Nota: Contact our technical service for higher performance

BM

Self-suction electro-pumps for Gas-oil

APPLICATIONS

Self-priming vane electro-pumps for the transfer of sea water, wine, gas-oil, petrol, etc. with no solid particles.

TECHNICAL CHARACTERISTICS

Type: Self-priming for gas-oil

Flow (l/h): 420 - 3600

Height (m): 0 - 40

Cooling: External ventilation

Max. suction depth: 2,5 m. (7 m. with foot valve)

MATERIALS

Pump body: Bronze

Impeller: Teflon

Impeller vanes: Bakelite

Shaft: Stainless steel

Seal: Viton

TEXAS

Piston manual pump

APPLICATIONS

Piston manual pump for 7 m height maximum or as decoration pump for gardens

MATERIALS

Completely manufactured in iron casting

Piston in steel

TECHNICAL CHARACTERISTICS

Piston manual pump for clean water lifting

Maximum suction: 7m.

LOGICWALL

Pump driver with speed variator

OPERATION

New LOGICWALL pump controller with INVERTER system for the management and protection of the pumps, which is able to maintain a constant pressure independently of the flow demand by varying the rotation speed of the motor.

These controllers can be installed over the wall or on a base plate with a support. The LOGICWALL version can also be installed directly over the discharge pipe.

They are used individually to control a pump (it can be a surface or submersible pump) or in groups of up to 4 pumps communicated in parallel and operating in MASTER-SLAVE mode with alternation.

TECHNICAL CHARACTERISTICS

Control panel for easy and intuitive programming with warning leds (POWER ON - ON/OFF - PUMP ON - FAILURE - ALARM)

Pressure reading through external pressure transducer

Intensity current sensor with instantaneous reading

Protections against lack of water, over-current, abnormal power supply, short circuit and over-heating

Automatic reset in case of blockade: During the following 24 hours after the blockade, the machine performs ten double attempts to reset, lasting about 5 seconds each attempt, to pressurize the installation again.

Antilock function: If the pump is not used for 24 consecutive hours, the device starts the engine for about 5 seconds. Should it continue inactive, this operation will be repeated every 24 h.

It’s possible to connect a level switch as protection. This system is independent of the safety system against dry running operation

Possibility of connecting the switch as remote ON / OFF or remote alarm

Upon request, KIT for data transmission via GSM can be supplied

SANITARIO

Fixed membrane sanitary tank

APPLICATIONS

Multi-functional tanks thanks to its making, FR suitable for sanitary water installations, pressure equipments or expansion vessels for heating systems.

TECHNICAL CHARACTERISTICS

Type: Sanitary fixed membrane tanks

Capacity (L): 8 - 500

Max. pressure (BAR): 10

Temperature (ºC): -10 / +99

Official approval: 2014/68/UE

Guarantee: 3 years

MATERIALS

Outside tank: Pressed steel with epoxy exterior paint

Inside tank: TOP-PRO treatment (anti-corrosion, electro-static and non-toxic)

Water connection internal protection: NYLON 66

Membrane: Butyl for food use

SOLAR

Expansion vessel for solar energy

APPLICATIONS

Compact and fixed equipment specially designed for the filling of circuits in solar-energy installations.

It can maintain the installation at constant working pressure, filling collectors when there is leakage or decrease in the initially set pressure.

MATERIALS

Outside tank: Pressed steel with epoxy exterior paint

Inside tank: TOP-PRO treatment (anti-corrosion, electro-static and atoxic)

Membrane: SBR

VASOEXPANSION

Fixed membrane expansion vessel

APPLICATIONS

Expander tanks for heating and cooling installations, suitable for absorbing volume increases produced by difference in temperatures.

Very important: Always install the expansion vessel in the back and close to the boiler.

TECHNICAL CHARACTERISTICS

Type: Expansion vessels of fixed membrane

Capacity (L): 5 - 500

Max. pressure (BAR): 8 - 10

Temperature (ºC): -10 / +99

Official approval: 2014/68/UE

MATERIALS

Tank: Pressed steel with epoxy exterior paint

Membrane: SBR

GLV

Pressure units with LOGICVAR variable-frequency drive

APPLICATIONS

Pressure equipments with variable-frequencydrive LOGICVAR installed on the pump’s outlet pipe. It has an internal transducer because the water flows through the VFD’s interior.

These equipments can provide a constant pressure independently of the demanded water consumption and offer considerable energy savings.

They can be mounted with just one pump or in equipments with 2 or 3 communicated pumps and operating in MASTER-SLAVE mode with alternation.

SIMPLE EQUIPMENTS’ COMPONENTS (GSLV)

1 Centrifugal electro-pump

1 Check valve

1 Ball valve

1 Variable frequency drive LOGICVAR

1 Membrane tank Hasabox 24 L

1 Galvanized-sheet base plate

DOUBLE EQUIPMENTS’ COMPONENTS (GDLVALT)

2 Centrifugal electro-pumps

2 Check valves

2 Ball valves

2 Variable frequency drive LOGICVAR

1 Discharge manifold

1 Membrane tank Hasabox 24 L

1 Galvanized-sheet base plate

Upon request they can be provided with manifold and valves in the pump’s suction.

Nota: Very important: Specify the equipment operation voltage (single-phase 230V, three-phase 400V). Please contact our technical department for not specifi ed equipment.

LOGICVAR

Pump driver with speed variator

OPERATION

LOGICVAR pump controller handles and protects pressure equipments by means of a reliable electronic control system.

Furthermore, it can keep constant pressure regardless of the flow demand, by varying motor speed by means of an INVERTER system in power control.

Simple motor specification configuration, as the user only has to set up pressure adjustement and nominal intensity.

TECHNICAL CHARACTERISTICS

Type: Variable-frequency-drive

IP: 65

Max. temp. water: 60ºC

Max. room temp.: 60ºC

ADVANTAGES

Possibility of alternation of regulated pump in multipump systems by means of a communication protocol (COM models)

Without pressure switches, only with integrated internal transducer

Protects against running in dry conditions, short-circuits, amperometric, and overheating

Voltage, pump in operation and failure indicators

Button to activate/deactivate automatic function mode

Push button keyboard for easy and intuitive programming

Large heat dissipation surface

Built-in check valve

NIZALOGIC

Simple pressure units with LOGICVAR variable-frequency drive

APPLICATIONS

Pressure equipments with LOGICVAR variable-frequency drive mounted in the output jack, subsequently a discharge pipe is mounted in the installation.

They are very suitable for the water supply in blocks of flats, sports facilities, industries, hotels and in general in any case where water pressure is not enough to cover the supply demand.

These equipments can supply a constant pressure independent of the required water consumption and offer considerable energy savings.

With a simple configuration, only the pump’s nominal intensity, working pressure and start pressure parameters need to be adjusted

They can be installed with any kind of pump thanks to their interchangeable fittings of 1" - 1¼" - 1½".

COMPOSITION

1 Pump (NIZA – TWIN-IMPELLER – SINGLE-IMPELLER).

1 LOGICVAR variable-frequency drive.

1 Pressure transducer 4-20 mA (inside the VFD).

GT

Surface self-suction centrifugal electro-pumps

APPLICATIONS

Self-priming electro-pumps suitable for ditch drainage, pond emptying, wells, waste water or chemical liquid pumping

TECHNICAL CHARACTERISTICS

Type: Self-priming for waste water

Motor: Extended shaft coupled with flange

rpm: 2900

IP: 54

Isolation: F

Cooling: External ventilation

Temp. max. (ºC): 95

Max. viscosity: 150 mPa·s

Max. suction depth: 7 m.

MATERIALS

Pump body: Cast iron

Motor bracket: Cast iron

Impeller: Cast iron

Shaft: Stainless steel

Mechanical seal: Ceramic/Graphite