NOVAX
Self-suction pumps for racking
APPLICATIONSSelf-priming electropumps built in stainless steel alloy. Ideal for transferring fluid foods without suspended foreign bodies, whose viscosity does not exceed 30 cst.
TECHNICAL SPECIFICATIONSType: Self-primmingFlow (l/h): 100 - 6500Head (m): 0 - 24IP: X4
Cooling: External ventilationTemp. max.: 35ºCRoom temp.: 4ºC - 40ºCMax. suction depth: 9 m.Viscosity max.: 30 cstWith rotational direction inverter switch.Built-in oil seal.Vertical fittings in NOVAX 20/25 models.Vertical and curved fittings in NOVAX 30/40 models.Single-phase models with built-in heat protector.For temperatures up to 95ºC, please consult models.
MATERIALSPump body: Stainless steel
Seal bracket cover: Noryl®Impeller: Stainless steelFittings: Stainless steelShaft: Stainless steelO'rings: NBR
BE
Self-suction pumps for racking
APPLICATIONSSelf-priming liquid-ring electro-pumps.Suitable for the transfer of gas-oil, wine, grape juice, fresh and sea water and oils with viscosity lower than 30 cst.
TECHNICAL CHARACTERISTICS
Type: Self-primmingFlow (l/h): 100 - 6500Head (m): 0 - 24IP: X4 / 55Cooling: External ventilationTemp. max.: 35ºCAmbient temp.: 4ºC - 40ºCMax. suction depth: 9 m.Viscosity max.: 30 cstReversible close-coupled pumps with commutator of rotation direction change (except for model MARINA).Built-in oil seal.Vertical fittings in models BE-20M, BE-25M and MARINA.Vertical and curved fittings in models BE-30/40.Single-phase models with built-in heat protector.
MATERIALSPump body: BrassSeal support cover: Noryl®Impeller: BrassFittings: BrassShaft: ‘AISI 304’ Stainless steelO'rings: NBR
HGM
Self-suction electro-pumps for Gas-oil
APPLICATIONSSelf-priming liquid-ring electro-pumps.Suitable for pumping and supply of gas-oil to heating boilers through a pressure equipment.
TECHNICAL CHARACTERISTICSType: Self-priming for gas-oilFlow (l/h): 300 - 2700Head (m): 5 - 50rpm: 2850IP: 44 (HGM-45) - 55 (HG-60/80)Isolation: FCooling: External ventilationTemp. max. (ºC): 60 (HGM-45) - 90 (HG-60/80)Max. suction depth: 7 m.In case of suctions higher than 4 m., the tube diameter must be increased.
MATERIALSPump body: Cast ironUnion body: Cast ironImpeller: HGM-50: Bronze, HGM/T-60 HGM/T-80: Brass
Shaft: HGM-45: ‘AISI 304’ Stainless steel. - HGM/T-60 HGM/T-80: ‘AISI 416’ Stainless steel.Mechanical seal: Resistant to hydrocarbon
GH
Automatic pressure units for gas-oil
APPLICATIONSPressure boosters for gas-oil specially designed for gas-oil automatic supply to boiler burners.
TECHNICAL CHARACTERISTICSType: Pressre boosters for gas-oilFlow (l/h): 300 - 2700Head (m): 5 - 50rpm: 2850IP: 44 (HGM-45) - 55 (HG-60/80)Isolation: FCooling: External ventilationTemp. max. (ºC): 60 (HGM-45) - 90 (HG-60/80)Max. suction depth: 7 m.
OILBOX COMPONENTSPump with self-priming liquid ring system (HGM)Start and stop pressure switch (FSG-)Expansion vessel for hydrocarburesManometer 0-6 kg/cm25-way fittingCable with plug
GH COMPONENTSPump with self-priming liquid ring system (HGM)Electric control panel with switch, manual push-button and failure indicatorStart and stop pressure switch (FSG-2)Safety inverter pressure switch (XMX 6kg)Expansion vessel for hydrocarburesManometer 0-6 Kg/cm2Discharge manifold with shut-off ball valveGas-oil filter and check valveCable with plug
BAG
Electro-pump for gas-oil
APPLICATIONSSelf-priming vane electro-pump.Suitable for gas-oil or similar low viscosity liquids transfer.
TECHNICAL CHARACTERISTICSType: Self-priming for gas-oilFlow (l/h): 1000 - 4000Head (m): 0 - 20rpm: 2800IP: 55Isolation: FCooling: External ventilationMax. viscosity: 43 cstPumps are supplied with 2 m. cable with plug and on-off switch.2’’ thread fitting allows direct connection to gas-oil tanks.
MATERIALSPump body: Cast ironPump body cover: Stainless steelImpeller: Stainless steelImpeller vanes: POM plasticShaft: Stainless steel
Seal: VitonO'rings: Viton
BAG50COM
Transfer equipment for gas-oil
APPLICATIONSDiesel oil transfer equipments.Suitable for the supply of vehicles, tanker trucks, drums and any kind of diesel oil container. The pump has a 2” fitting that allows a direct connection to the diesel oil tanks.
TECHNICAL CHARACTERISTICSType: Transfer equipment for gas-oilFlow (l/h): 1000 - 4000Head (m): 0 - 20rpm: 2800IP: 55Isolation: FCooling: External ventilationMax. viscosity: 43 cst
BAG-50 ECO COMPONENTS1” Foot valve1,5 m. Suction hose for gas-oilSelf-primming pump BAG-50 with fitting for direct connection to tankPump-flowmeter union fittingElbow 90º 1”5 m. Discharge Ø20mm hose for gas-oil1’’ Rotation automatic gas-oil gun (60 l/min flow)
BAG-50 COM COMPONENTS1” Foot valve1,5 m. Suction hose for gas-oilSelf-primming pump BAG-50 with fitting for direct connection to tankPump-flowmeter union fittingMechanical flowmeter in aluminiumElbow 90º 1”5 m. Discharge Ø20mm hose for gas-oil1’’ Rotation automatic gas-oil gun (60 l/min flow)Nota: Tank not included.
DIESELKIT
Accessories for gas-oil transfer
DIESEL KIT 20/25 MM.Complete transfer kit:Gun in plastic2 stainless steel flangesSuction filter5m. hose resistant to gas-oil
FLOWMETERMechanical flowmeter without filter. 3-digit partial counter and 9-digit totalization counter.Type: Gas-oil flowmeterFlow (l/h): 1200 - 7200Max. pressure: 3,5 BARPrecision: ± 2%Cooling: External ventilationStorage temp.: -10ºC - 60ºCHead loss: 0,05 - 0,4 BARFlowmeter body: Aluminium
MANUAL STOP GUNType: Distribution gunFlow: 80 l/minHose fitting: Ø 20mmStop system: Manuel
AUTOMATIC STOP GUNType: Distribution gun with rotary fittingFlow: 60 l/minMax. pressure: 2,5 BARHose fitting: Ø 20mmStop system: Automatic (when the tank is full)
DRILL
Accessories for gas-oil transfer
APPLICATIONSReversible self-priming liquid ring electro-pumps. Suitable for the transfer of fresh and sea water, gas-oil, wine, grape juice and oils.With adapter for use by drill.
TECHNICAL CHARACTERISTICS
Type: Pump for drillFlow (l/h): 0 - 1500Head (m): 0 - 24Ø Shaft: 9 mmr.p.m.: 3000Temp. max.: 35ºCMax. suction depth: 5 m.Viscosity: 30 cst
MATERIALSPump body: Brass
Impeller: BrassFittings: BrassShaft: ‘AISI 304’ Stainless steelSeal support cover: Noryl®.
W
One-piece gear electro-pump
APPLICATIONSRobust electro-pumps suitable for the transfer of gas-oil, fuel-oil, oils and in general, all kind of lubricant liquids with no suspended particles.
TECHNICAL CHARACTERISTICSType: Self-priming with gearsFlow (l/h): 220 - 5000Pressure (BAR): 6 - 10IP: 54Isolation: FCooling: External ventilationTemp. max. (ºC): 90Max. suction depth: 5 m.Viscosity max.: 10.000 cpsSeal: Packing gasketIt can be installed in any position, vertical or horizontal, in order to better fit to the available space.Built-in safety valve in all models.Upon request pressure equipments for gas-oil can be manufactured with these models.
MATERIALSPump body: GG-20 Cast ironGears: Treated steel
F
One-piece gear electro-pump
APPLICATIONSRobust self-priming close-coupled gear pumps, volumetric and positive displacement type. Useful for the transfer of viscous fluids, particularly: gas-oil, fuel-oil, oils, syrups, glycerine, paint, etc. and in general, all kind of lubricant liquids without suspended particles.
TECHNICAL CHARACTERISTICSType: Self-priming with gearsMotor: Three-phaseIsolation: Fr.p.m.: 1450Cooling: External ventilationMax. pressure: 12 BARTemp. max.: 180ºCMax. viscosity: 350 cSt (SAE 120)It can be installed in any position, vertical or horizontal, in order to better fit to the available space.Built-in safety valve in the pump cover.Upon request, available with 6 or 8-poles motors or even with geared motor for higher viscosity.Also available with ATEX motor.Possibility of installation with packing to work with liquids up to 250 ºC
MATERIALSPump body: Cast iron.Gears: Case-hardering steel.Shaft: Case-hardering steel.Mechanical seal: VitonO'ring: Viton
