FUCSIA
Peripheral centrifugal electro-pumps
APPLICATIONSPeripheral electro-pumps suitable for installations where high pressure and reduced flows are required.
TECHNICAL CHARACTERISTICSType: PeripheralFlow (l/h): 3000 - 300Head (m): 10 - 50r.p.m.: 2800IP: X5Isolation: FCooling: External ventilationTemp. max. (ºC): 60Max. suction depth: 7 m.
MATERIALSPump body: BrassImpeller: Brass
Shaft: ‘AISI 420’ (50) ‘AISI 416’ (100) Stainless steelMechanical seal: Ceramic/Coal
Screws: Stainless steel
ZV
Cooling electro-pumps for machine tools
APPLICATIONSCentrifugal semi-submersible electro-pumps specially designed for the recirculation of coolant liquids up to 60º C
TECHNICAL CHARACTERISTICSType: Semi-submersible stem pumpSupply voltage: Three-phase 3~230/400V 50HzIP: X5Isolation: Fr.p.m.: 2800Cooling: Closed motor without ventilation (ZV 35) - External ventilation (ZV-90/100)Temp. max. (ºC): 60
MATERIALSStem: Nylon (ZV 35) / PBT (ZV 90-100)
Pump body: Polypropylene (ZV 35) / PBT (ZV 90-100)Impeller: Nylon (ZV 35) / Ryton (ZV 90-100)Shaft: ‘AISI 420’ Stainless steelScrews: Stainless steel
MAG
Magnetic dragging pumps
APPLICATIONSMagnetic close-coupled pumps with no mechanical seal, suitable for aggressive and clean liquidsPumps for pumping acids, corrosive liquids, alkali, sea-water, solvents, bleach factories, photographic processing solutions, aquariums, laboratory installations, etc.
TECHNICAL CHARACTERISTICSType: Magnetic driveFlow (m3/h): 0,3 - 40Head (m): 2 - 28IP: 44 (MAG-13/17) - 55 (MAG-33/400)Isolation: Fr.p.m.: 2850Cooling: External ventilationRoom temp. (ºC): 40Prevent from suction of foreign bodies.No operation with hoses with Ø lower than inlets.Do not work in dry conditions.They must be used always loaded or with priming tank (supplied separately).
MATERIALSPump body: Polypropilene (standard) PVDF (optional MAG-33...400)Impeller: Polypropilene (standard) PVDF (optional MAG-33...400)Shaft: CeramicO'rings: Viton
