JET
Self-priming centrifugal electro-pumps
APPLICATIONSSelf-priming electro-pumps suitable for booster sets and small irrigations.For suctions over 4 mts. a pipe with diameter greater than the specified one must be installed.
TECHNICAL CHARACTERISTICSType: Self-primingFlow (l/h): 7300 - 500
Head (m.): 15 - 55r.p.m.: 2850IP: 44Isolation: FCooling: External ventilationTemp. max. (ºC): 40Max. suction depth: 9 m.Impeller: Closed
MATERIALSPump body: Cast iron
Union body: Cast iron
Impeller: Noryl® (NPM1 - NPM3) // Brass (NP1 - NP3 - NP4 - NPM4 - NP8 - NPM8)
Diffuser: Noryl®
Venturi: Noryl®
Shaft: Stainless steel
Mechanical seal: Ceramic/Graphite
DUOJET
Self-priming centrifugal electro-pumps
APPLICATIONSSelf-priming electro-pumps for deep suctions with double pipe up to 50 m. through ejector.Suitable for wells of Ø 4” minimum.
TECHNICAL CHARACTERISTICSType: Self-primingFlow (l/h): 3800 - 100Head (m): 10 - 50r.p.m.: 2850IP: 44Isolation: FCooling: External ventilationTemp. max. (ºC): 50Max. suction depth: 50 m.Impeller: Closed
MATERIALS
Pump body: Cast iron
Union body: Cast ironImpeller: Noryl®
Diffuser: Noryl®
Venturi: Noryl®
Ejector: Cast iron
Shaft: Stainless steelMechanical seal: Ceramic/Graphite
MEGA
Self-priming centrifugal electro-pumps
APPLICATIONSSelf-priming electro-pumps suitable for booster sets and small irrigations.
For suctions over 4 mts. a pipe with a diameter greater than the specified one must be installed.
TECHNICAL CHARACTERISTICSType: Self-primingFlow (l/h): 4200 - 600Head (m): 10 - 45r.p.m.: 2850IP: 44Isolation: FCooling: External ventilationTemp. max. (ºC): 35Max. suction depth: 9 m.Impeller: Closed
MATERIALSPump body: ‘AISI 304’ Stainless steel
Union body: Aluminium
Impeller: Noryl®
Diffuser: PVC
Ejector: PVC
Shaft: Stainless steel
Mechanical seal: Alumina/Carbon-graphite
A
Self-priming centrifugal electro-pumps
APPLICATIONSSelf-priming electropumps up to 7 m, without foot valve.Suitable for the ransfer of clean or slightly muddy water.
TECHNICAL CHARACTERISTICSType: Self-primingFlow (m3/h): 156 - 6Head (m): 4 - 33r.p.m.: 2850IP: 55Isolation: FCooling: External ventilationTemp. max. (ºC): 90Max. suction depth: 7 m.Impeller: Open
MATERIALS
Pump body: Cast iron
Motor support: Cast iron
Impeller: Cast iron
Shaft: ‘AISI 304’ Stainless steelMechanical seal: Ceramic/Graphite/NBR
